|
Nominees and Candidates Announced for
2010–2011 ASNT Officer and Director Positions
In accordance with the ASNT Bylaws, the Board of Directors has announced
the following nominees for officer and director positions for the
2010–2011 term.
The nominees for the positions of chair of the Board, president
and vice president are:
-
Chair of the Board: Joel W. Whitaker
-
President: Ricky L. Morgan
-
Vice President: Robert J. Potter.
The qualified candidates for the position of secretary/treasurer
as determined by the ASNT Bylaws are:
-
Secretary/Treasurer: B. Boro Djordjevic
-
Secretary/Treasurer: Raymond G. Morasse
-
Secretary/Treasurer: Roland J. Valdes
Qualified nominees for the open director at large
positions are as follows:
-
Director at Large: David R. Bajula
-
Director at Large: Danny L. Keck
-
Director at Large: Shant Kenderian
Nominees for council directors on the Board of
Directors are as follows:
-
Certification Management Council Director: Robert
A. Feole
-
Research Council Director: Lisa Brasche
-
Section Operations Council Director: David H. Mitchell
-
Technical and Education Council Director: Claudia
V. Kropas-Hughes
Additionally, petitions to be placed on the July ballot as a candidate
for any officer or director position must be received by 1
June 2010. Petitions for chair of the Board, president
and vice president must be signed by at least 5% of the Society’s
voting members, including a minimum of 10 members from 10 different
sections. Petitions for secretary/treasurer or director require
the signatures of at least 2% of the voting ASNT members, including
at least five members each from a minimum of 20 sections.
On 6 July 2010, all members for whom ASNT has
an e-mail address will receive balloting notification e-mails that
will include voting instructions, a voter login identification and
a link to the election Web page. ASNT will also mail paper ballots
to all voting members for whom it has no e-mail addresses and by
request. The completed ballots must be received on or before 20
August 2010.
Election results will be made public by 1 September 2010
on the ASNT Web site and will be published in the October issue
of Materials Evaluation.
Copyright © 2010 by the American Society for Nondestructive Testing, Inc. ASNT is not responsible for the authenticity or accuracy of information herein. Published opinions and statements do not necessarily reflect the opinion of ASNT. Products or services that are advertised or mentioned do not carry the endorsement or recommendation of ASNT.
IRRSP, NDT Handbook, The NDT Technician and www.asnt.org are trademarks of the American Society for Nondestructive Testing, Inc. ACCP, ASNT, Level III Study Guide, Materials Evaluation, Nondestructive Testing Handbook, Research in Nondestructive Evaluation and RNDE are registered trademarks of the American Society for Nondestructive Testing, Inc. ASNT exists to create a safer world by promoting the profession and technologies of nondestructive testing.
|