Positions Wanted
This Positions Wanted list corresponds to the monthly listing printed in Materials Evaluation. This is a free service for ASNT members. To have your qualifications given in one or both of these lists, contact the Assistant Editor of Materials Evaluation at (800) 222-2768 x205 or (614) 274-6003 X205 or e-mail tkervina@asnt.org. Web listings will remain online for 90 days unless withdrawn by the submitter.
Employers may contact the Assistant Editor at tkervina@asnt.org to reply to the Position Wanted postings in this Web site or those in the journal. The Assistant Editor will forward the employer's contact information to the member who placed the Position Wanted listing. It is the member who initiates further contact with the employer.
Ten years experience in fabrication of steam boilers and coal gasifiers for power plants, heat exchangers, and pressure vessels, reactors, columns, nuclear steam generators, pumps, valves, steel and chemical plants, water treatment and desalination, piping design and analysis, welding, oil and gas, refineries, blasting and surface preparation, painting inspection, thermal power and maintenance and shutdown. Diploma in mechanical engineering and certified in piping engineering. Completed program on welding training. Looking to become ASNT NDT Level III certified in RT, UT, MT, PT and VT. Also looking to become certified in AWS-CWI and SCWI. Willing to relocate. Reply to Dept. 08-03-10.
ASNT NDT Level III in ET, UT, MT, PT, and VT. Level II certified in RT and IR. B.S. degree, with CWI and A&P license. Fourteen years experience in aviation, aerospace, welding and foundry industries. Experience with digital radiography, terahertz inspection, computed tomography, phased array and shearography. Plan to become certified ASNT NDT Level III in RT & IR. Looking for any type of NDT work in southern Florida. Also looking to manage a quality department. Minimal travel is fine but not willing to relocate. Reply to Dept. 08-02-10.
Looking for work as an NDT engineer. Fourteen years experience. ASNT NDT Level III in RT, UT and MT, Level II PT, Radiation Safety Officer (RSO). Willing to relocate. Reply to Dept. 08-01-10.
Technician certified NDT Level II in Post Weld Heat Treatment, RT and film interpretation, UT and Phased Array and Time of Flight Diffraction, ET, LT, MT, PT, VT and also certified in Piping and Welding Technology, Certified Welding Inspector (CWI). Seven years experience. Looking for any NDT position available. Willing to relocate. Reply to Dept. 07-01-10.
Looking for NDT work as an inspector and on the job training in VT, UT, RT, MT, PT and ET. 12 years of VT welding inspection experience and 2 years of PT inspection experience in the railroad industry. Completed NDT training in May 2010. Would like to work towards Level II certification in all methods. Not willing to relocate. Reply to Dept. 07-02-10.
ASNT NDT Level III certified in MT and PT, Level II certified in UT (phased array and shear wave – sizing and detection). Also have CWI certification. Previous Level II certification in RT and ET. Twenty years experience in power generation, including nuclear, fossil, boilers, combustion turbines, pipeline integrity and refinery. Looking for opportunity in advanced ultrasonics. Willing to travel, possibly willing to relocate. Reply to Dept. 07-03-10.
Copyright © 2010 by the American Society for Nondestructive Testing, Inc. ASNT is not responsible for the authenticity or accuracy of information herein. Published opinions and statements do not necessarily reflect the opinion of ASNT. Products or services that are advertised or mentioned do not carry the endorsement or recommendation of ASNT.IRRSP, NDT Handbook, The NDT Technician and www.asnt.org are trademarks of the American Society for Nondestructive Testing, Inc. ACCP, ASNT, Level III Study Guide, Materials Evaluation, Nondestructive Testing Handbook, Research in Nondestructive Evaluation and RNDE are registered trademarks of the American Society for Nondestructive Testing, Inc. ASNT exists to create a safer world by promoting the profession and technologies of nondestructive testing.