The American Society for Nondestructive Testing

Members Only | Contact Us | ShopASNT | Search

Standards Development Committee

About the SDC
The Standards Development Committee (SDC) was established by the ASNT Board of Directors to develop and maintain ASNT American National Standards within the scope of nondestructive testing personnel qualification and certification under ASNT's accreditation by the American National Standards Institute (ANSI) as a standards developing organization.

The SDC operates according to these Policies and Procedures.

SDC Roster

Michael McDaniel, Chair
Ronald T. Nisbet, Vice Chair
George C. Belev
Stephen Black
Paul Deeds, Jr.
Darrell W. Harris
Victor Hernandez
Matthew Patience
Thomas Payne
William C. Plumstead
Michael Ruddy
Bruce D. Schlueter
Marvin W. Trimm
Michael L. Turnbow
William C. Veal
Charles Longo, Secretary (Ex-officio)

SDC Subcommittees
The following subcommittees have been established by the SDC. Each is listed with its respective area of responsibility and membership list. Subcommittees responsible for the review of standards are listed on the respective standard's page. See the full list here.

Finance Subcommittee
Responsibility to maintain SDC budget and finances.

Michael McDaniel, Chair
Ronald T. Nisbet, Vice Chair
Paul Deeds, Jr.
Charles Longo

Interpretation Subcommittee
This subcommittee of the SDC has the responsibility to draft interpretations of ASNT standards and submit them to the full committee.

Victor Hernandez, Chair
William C. Plumstead, Vice Chair
Paul Deeds, Jr.
Michael McDaniel
Michael Ruddy
Bruce D. Schlueter

ISO Subcommittee
Acts as the U.S. TAG to ISO/TC 135/SC 7, Non-destructive testing - Personnel qualification.

Michael L. Turnbow, Chair
Ronald T. Nisbet, Vice Chair
George C. Belev
Stephen Black
Robert Cameron
Paul Deeds, Jr.
Todd S. Fleckenstein
Irving Gray
Darrell W. Harris
James W. Houf
Victor Hernandez
Doron Kishoni
Joseph Mackin
Walter Matulewicz
Michael McDaniel
Matthew Patience
Bill Plumstead, Jr.
Robert Plumstead
William C. Plumstead
Sam Robinson
Michael Ruddy
Tom Schafer
Bruce D. Schlueter
Henry Stephens
Marvin W. Trimm
William C. Veal
Sharon Vukelich
Joel Whitaker
Charles Longo, Secretary (Ex-officio)

Policy and Rules Subcommittee
Responsibility to maintain SDC rules to remain in compliance with ANSI requirements and ASNT policy.

Michael McDaniel
Michael Ruddy
Bruce D. Schlueter
Charles Longo, Secretary

Copyright © 2008 by the American Society for Nondestructive Testing, Inc. ASNT is not responsible for the authenticity or accuracy of information herein. Published opinions and statements do not necessarily reflect the opinion of ASNT. Products or services that are advertised or mentioned do not carry the endorsement or recommendation of ASNT.

IRRSP, NDT Handbook, The NDT Technician and www.asnt.org are trademarks of the American Society for Nondestructive Testing, Inc. ACCP, ASNT, Level III Study Guide, Materials Evaluation, Nondestructive Testing Handbook, Research in Nondestructive Evaluation and RNDE are registered trademarks of the American Society for Nondestructive Testing, Inc.

ASNT exists to create a safer world by promoting the profession and technologies of nondestructive testing.


Marketplace Certification Publications Membership Meetings and Events Local Sections Links What's New Learning Awards and Honors Advertise	Members Only \| Contact Us \| ShopASNT \| Search
	Standards Development Committee About the SDC The Standards Development Committee (SDC) was established by the ASNT Board of Directors to develop and maintain ASNT American National Standards within the scope of nondestructive testing personnel qualification and certification under ASNT's accreditation by the American National Standards Institute (ANSI) as a standards developing organization. The SDC operates according to these Policies and Procedures. SDC Roster Michael McDaniel, Chair Ronald T. Nisbet, Vice Chair George C. Belev Stephen Black Paul Deeds, Jr. Darrell W. Harris Victor Hernandez Matthew Patience Thomas Payne William C. Plumstead Michael Ruddy Bruce D. Schlueter Marvin W. Trimm Michael L. Turnbow William C. Veal Charles Longo, Secretary (Ex-officio) SDC Subcommittees The following subcommittees have been established by the SDC. Each is listed with its respective area of responsibility and membership list. Subcommittees responsible for the review of standards are listed on the respective standard's page. See the full list here. Finance Subcommittee Responsibility to maintain SDC budget and finances. Michael McDaniel, Chair Ronald T. Nisbet, Vice Chair Paul Deeds, Jr. Charles Longo Interpretation Subcommittee This subcommittee of the SDC has the responsibility to draft interpretations of ASNT standards and submit them to the full committee. Victor Hernandez, Chair William C. Plumstead, Vice Chair Paul Deeds, Jr. Michael McDaniel Michael Ruddy Bruce D. Schlueter ISO Subcommittee Acts as the U.S. TAG to ISO/TC 135/SC 7, Non-destructive testing - Personnel qualification. Michael L. Turnbow, Chair Ronald T. Nisbet, Vice Chair George C. Belev Stephen Black Robert Cameron Paul Deeds, Jr. Todd S. Fleckenstein Irving Gray Darrell W. Harris James W. Houf Victor Hernandez Doron Kishoni Joseph Mackin Walter Matulewicz Michael McDaniel Matthew Patience Bill Plumstead, Jr. Robert Plumstead William C. Plumstead Sam Robinson Michael Ruddy Tom Schafer Bruce D. Schlueter Henry Stephens Marvin W. Trimm William C. Veal Sharon Vukelich Joel Whitaker Charles Longo, Secretary (Ex-officio) Policy and Rules Subcommittee Responsibility to maintain SDC rules to remain in compliance with ANSI requirements and ASNT policy. Michael McDaniel Michael Ruddy Bruce D. Schlueter Charles Longo, Secretary Copyright © 2008 by the American Society for Nondestructive Testing, Inc. ASNT is not responsible for the authenticity or accuracy of information herein. Published opinions and statements do not necessarily reflect the opinion of ASNT. Products or services that are advertised or mentioned do not carry the endorsement or recommendation of ASNT. IRRSP, NDT Handbook, The NDT Technician and www.asnt.org are trademarks of the American Society for Nondestructive Testing, Inc. ACCP, ASNT, Level III Study Guide, Materials Evaluation, Nondestructive Testing Handbook, Research in Nondestructive Evaluation and RNDE are registered trademarks of the American Society for Nondestructive Testing, Inc. ASNT exists to create a safer world by promoting the profession and technologies of nondestructive testing.