Volume 7, Number 4

October 2008

 

Working Smarter Avoiding Nicks, Dings and Scratches in FPI

In the aerospace industry, very tight tolerances and surface finishes may be required. To avoid metal on metal contact while performing liquid fluorescent penetrant inspection, try placing expanded plastic mesh on metal surfaces. It is relatively inexpensive and can be cut to size with scissors or wire cutters (Fig. 1). We utilize the plastic mesh throughout our system, i.e. cleaning baskets, dip baskets, dwell and rinse stations, dryer and developer tank as well, thus preventing nicks, dings, and scratches that could possibly cause rejects or rework. It’s a simple task to replace the mesh if needed. However, the mesh that we have been using throughout our line for the last five years has only needed replacement once. It should be noted that mesh from the dryer and developer tank need to be frequently scanned under black light for possible retained penetrant. If the mesh fluoresces, rinse until clear or replace the mesh to eliminate any contamination issues. Caution should also be exercised to avoid over-rinsing of product. Gregory P. Robinson Eaton Aerospace ASNT NDT Level III North Charleston, SC gregoryprobinson@eaton.com TNT

Figure 1. Expanded plastic mesh prevents metal on metal contact in fluorescent penetrant inspection system. Arrows show placement in (a) dip basket, (b) dwell station, (c) rinse tank, (d) dryer, and (e) developer tank.

 

 

[ The NDT Technician ]

 

 

---

 
Copyright © 2010 by the American Society for Nondestructive Testing, Inc. ASNT is not responsible for the authenticity or accuracy of information herein. Published opinions and statements do not necessarily reflect the opinion of ASNT. Products or services that are advertised or mentioned do not carry the endorsement or recommendation of ASNT.

IRRSP, NDT Handbook, The NDT Technician and www.asnt.org are trademarks of the American Society for Nondestructive Testing, Inc. ACCP, ASNT, Level III Study Guide, Materials Evaluation, Nondestructive Testing Handbook, Research in Nondestructive Evaluation and RNDE are registered trademarks of the American Society for Nondestructive Testing, Inc. ASNT exists to create a safer world by promoting the profession and technologies of nondestructive testing.