Directory of Educational Institutions
Directory of Educational Institutions Offering Courses in Nondestructive Testing
This directory of educational institutions engaged in teaching nondestructive testing (NDT) has been produced by ASNT’s Publications Department on the basis of surveys and inquiries. The listing is divided into sections according to the type of institution offering instruction: vocational /technical schools generally offer a course of study leading to a diploma or an associate’s degree; junior colleges generally offer a course of study leading to an associate’s or bachelor’s degree; senior colleges generally offer courses of study leading to a bachelor’s, master’s or doctoral degree; industrial/corporate institutions offer professional training, which may or may not include some form of certification or diploma. After the name, address, phone number and contact person, information about the program follows — usually including the methods taught, the number of contact hours for each, the enrollment in the NDT courses and the year when the facility first offered NDT coursework.
ASNT neither approves nor disapproves of any of the following training programs or courses and is not responsible for the authenticity or accuracy of any information listed. Contact the appropriate organization directly for specific details. Several local ASNT sections also offer educational courses, often awarding CEUs and covering a variety of NDT methods. The information given is current to the best of our knowledge.
Modifications to this listing should be sent to the associate editor of Materials Evaluation, ASNT, P.O. Box 28518, Columbus, OH 43228-0518; fax (614) 274-6899; firstname.lastname@example.org.
Advanced Technology Testing and Research
27/134 Springvale Rd., P.O. Box 286, Springvale, Victoria 3171, Australia. Contact: Gary Martin; 61 3 9574 6144; fax 61 3 9574 6133; e-mail email@example.com; website www.attar.com.au.
Offers a number of courses designed to meet the requirements of AS 3998-2002 and ISO 9712:1999; courses meet or exceed SNT-TC-1A and NAS 410.
Australian Institute for Non Destructive Testing
Unit 10, Level 4, 70 Racecourse Rd., North Melbourne, Victoria, Australia 3051. Contact: 61 3 9328 8831; fax 61 3 9328 8787; e-mail firstname.lastname@example.org; website www.aindt.com.au.
Ground Floor, No. 8, 3rd Alley, Kooye Nasr (Gisha Ave.), Tehran, Iran 1413696534. Contact: Siamak Biglari; 98 21 8824-5690; fax 98 21 8863-3719; e-mail email@example.com; website www.bksco.ir.
Offers a number of courses designed to meet SNT-TC-1A requirements in LT, MT, PT, RT, UT and VT. Also offers courses in ASME code on welding and NDT requirements. Students must meet prerequisite requirements to enroll in the courses; since 1997.
Career Technology Center of Lackawanna County
3201 Rockwell Ave., Scranton, PA 18508. Contact: Francis Brieden; (570) 346-8471; fax (570) 342-4251; e-mail firstname.lastname@example.org; website www.ctc.tec.pa.us.
Offers fundamentals of MT, PT and UT.
Chattahoochee Technical College
5198 Ross Rd., Acworth, GA 30102. Contact: Brenda White, dean; (770) 975-4108; e-mail email@example.com; website www.northmetrotech.edu.
Classroom and practical instruction held on campus includes ET (50 h), MT (40 h), PT (40 h), RT (100 h), UT (100 h), VT (40 h), industrial safety (30 h) and radiation safety (50 h) courses. Certificate program (2 qtrs. in length). 40 students per year. Since 2008.
Clover Park Technical College
4500 Steilacoom Blvd. SW, Lakewood, WA 98499-4004. Contact: Claire Korschinowski; (253) 589-5516; fax (253) 589-5637; email firstname.lastname@example.org; website www.cptc.edu.
Courses offered include RT, UT, ET, MT, PT, VT, metallurgy, NDT physics, NDT math, manufacturing processes, blueprint reading, NDT welding, emphasis on report writing and adherence to codes/specifications, NDT composites. An AAS-T degree is awarded upon successful completion of the program or certificate options are offered for individual methods.
Commercial Diving Academy
8137 N. Main St., Jacksonville, FL 32208. Contact: (888) 974-2232; e-mail email@example.com; website www.commercialdivingacademy.com.
VT Level I; UT Level II and MT Level II certificates.
7000 Crossroads Boulevard, Oklahoma City, OK, 73149, USA. Contact: Mark Stowers; (405) 631-7990; e-mail firstname.lastname@example.org; website www.crossroadsinstitute.net.
Offers courses designed to meet SNT-TC-1A requirements in MT, PT, UT, ET, RT and VT. Also offers courses in First Aid, CPR, and AED. Additionally, OSHA ten and thirty hour courses are offered.
Divers Academy International
Lakeside Business Park, 1500 Liberty Place, Erial, NJ 08081. Contact: Tamara Brown; (856) 966-1871; fax (856) 541-4355; e-mail email@example.com; website www.diversacademy.com
Offers Level I and II courses.
Divers Institute of Technology
4315 11th Avenue N.W., P.O. Box 70667, Seattle, WA 98107. Contact: (800) 634-8377; e-mail firstname.lastname@example.org; website www.diversinstitute.com.
NDT supplements underwater inspection program; UT 72 h (Level II); PT 18 h (Level II); MT 30 h (Level II); diploma.
2000 Simcoe St. N., Oshawa, ON L1H 7K4, Canada. Contact: Katy Zaidman; (905) 721-3111 X3151; fax (905) 721-3113; e-mail email@example.com; website www.durhamcollege.ca.
Offers a two-year mechanical engineer technician (NDT) diploma. Program of studies includes 56 h courses in ET, MT, PT, RT and UT.
Equipment Reliability Institute (ERI)
1520 Santa Rosa Ave., Santa Barbara, CA 93109. Contact: Wayne Tustin; (805) 564-1260; fax (805) 966-7875; e-mail firstname.lastname@example.org; website www.equipment-reliability.com or www.vibrationandshock.com.
Special emphasis on how materials are stressed to prove the reliability and durability of equipment made from those materials.
Hannibal Area Vocational & Technical School
4550 McMasters Ave., Hannibal, MO 63401. Contact: Bobby Wilson; (573) 221-4430; fax (573) 221-7971; e-mail email@example.com.
Harvard H. Ellis Technical High School
613 Upper Maple St., Danielson, CT 06239. Contact: (860) 774-8511; fax (860) 779-1563; e-mail firstname.lastname@example.org; website www.cttech.org/ellis/.
NDT supplements aircraft maintenance technology; MT, PT, VT 20 h each; diploma; 40 students per year; since 1940.
Hobart Institute of Welding Technology
400 Trade Square E., Troy, OH 45373. Contact: Terre Bailey; (800) 332-9448 X5300; fax (937) 332-5200; e-mail email@example.com; website www.welding.org.
Offers courses on fundamentals of VT, arc welding and quality control, MT and PT, and other courses in welding.
Ideh Azma Iranian International Co. (IAI Co.)
Unit 4/3, 4th Floor, Saman Tower, Sadeghiye Sq., Tehran, Iran. Contact: Amir Ghasemi; 009821 44058975; e-mail firstname.lastname@example.org; website www.idehazma.ir.
Offers advanced NDT and inspection courses for employers around the world. Services offered: NDT procedure preparation, Level I and II training courses according to SNT-TC-1A, ASNT NDT Level III refresher courses for ASNT NDT Level III examinations around the world, and technical inspection for industrial products that are the result of welding, casting, forging, biomaterial, heat treatment, etc. Courses conducted by one of Iran’s leading NDT practitioners, Amir Ghasemi, ASNT NDT Level III.
Inspection Consultants International Philippines, Inc.
93-1A Gordon Ave., New Kalake, Olongapo City 2200, Philippines. Contact: Tom O'Connor; 63 47 223-6176; fax 63 47 223-6175; e-mail email@example.com; website ici-philippines.com.
Offers MT, PT, RT, UT and VT courses and specialized courses in rigging and crane testing.
Continuing Education Department, Rundell Hall, Room 114A, P.O. Box 818, Baytown, TX 77522; website www.lee.edu/ce.
Louisiana Technical College
T.H. Harris Campus, 322 E. South St., Opelousas, LA 70570. Contact: Steven Hicks or Reggie Lemoine, instructors; (337) 948-0239; fax (337) 948-0243; website www.ltc.edu
Offers courses in MT, PT, RT, UT and VT.
Middle East Industrial Training Institute
P.O. Box 33229, Abu Dhabi, United Arab Emirates. Contact: 971 2 5827445; fax 971 2 5827445; e-mail firstname.lastname@example.org; website www.meiti-uae.com.
Offers classroom and laboratory courses to all industrial sectors for Levels I and II and refresher Level III in ET, MT, PT, RT, UT, VT, and radiation safety and film interpretation. Certified programs for welders, fitters, supervisors and inspectors in accordance to AWS and other standards. Specialized training for shipbuilding and repair. Technical support services and consulting.
Minneapolis Community and Technical College
Aviation Training Center, 10100 Flying Cloud Dr., Eden Prairie, MN 55347. Contact: George Hoxie; (952) 826-2454; e-mail email@example.com; website www.minneapolis.edu.
National University Polytechnic Institute
3570 Aero Ct., San Diego, CA, 92123. Contact: (800) 432-3483; fax (858) 309-3510; e-mail firstname.lastname@example.org; website www.nupolytech.org.
Offers an eight month certificate program in Marine Technology, which includes a specialty in Non-Destructive Testing. The specialty includes curriculum designated to meet the recommendations set forth in SNT-TC 1A in Magnetic Particle Testing Levels I and II (32 h), Liquid Penetrant Testing Levels I and II (32 h), Ultrasonic Testing Level I (64 h), Ultrasonic Testing Level II (64 h), and Visual Testing Levels I and II (64 h).
NDE Institute of Trinidad Ltd
15 Robertson Street, Les Efforts East, San Fernando, Trinidad & Tobago. (868) 653-9343; fax (868) 657-6572; e-mail email@example.com; website www.learnndt.com.
Offer NDT training in the following: Level I and II training in PT, MT, UT, RT, Film Interpretation, Thickness Gauging and Thermal Infrared.
NDT Training & Testing Center
7303 Windfern Rd., Ste. 300, Houston, TX 77040. Contact: Paul T. Marks; (713) 849-4006; fax (713) 849-4008; e-mail firstname.lastname@example.org; website www.ndt-training.org.
Classroom and practical instruction in the following methods are regularly held on campus: Level I and II courses in MT, PT, RT including film interpretation, UT including fundamentals of phased array, and VT. Coursework offered online includes MT, PT, UT, VT and film interpretation. In certain circumstances, courses can be held onsite at company locations. All course material meets or exceeds SNT-TC-1A. Specialized courses are also offered to assist technicians to prepare for CWI and API certification exams.
Northeast Wisconsin Technical College
2740 W. Mason St., P.O. Box 19042, Green Bay, WI 54307-9042. Contact: Gary L. Morgan, dean; (920) 498-5400; e-mail email@example.com; website www.nwtc.edu.
Specific programs in NDT, precision inspection and quality assurance; ET 60 h; MT 61 h; PT 51 h; RT 80 h; UT 108 h; diploma, AAS; 32 students per year; since 1979.
10840 Rockley Rd., Houston, TX 77099. Contact: Don Fast; (800) 321-0298; fax (281) 530-9143; e-mail firstname.lastname@example.org; website www.oceancorp.com.
Offers a one academic year program in NDT that includes the following: Level I and II training in ET, MT, PT, RT, UT, VT and radiation safety (40 h approved by the state of Texas).
Ridgewater College, Hutchinson Campus
2 Century Ave. S.E., Hutchinson, MN 55350. Contact: Mike Mullan; (800) 222-4424; fax (320) 234-0271; e-mail email@example.com; website www.ridgewater.edu.
Courses offered include AE, ET, LT, MT, PT, RT, UT, VT, blueprint reading, metallurgy, NDT welding, applied NDT physics, isotope and radiation safety, report writing and codes/specifications. Completion of program results in an AAS degree, with the option of an NDT diploma, an aviation maintenance diploma or certificate options.
Rochester Institute of Technology
Department of Chemistry, 85 Lomb Memorial Dr., Rochester, NY 14623. Contact: Andreas Langner; (716) 475-6660; fax (716) 475-5766; e-mail firstname.lastname@example.org; website www.rit.edu.
Graduate and undergraduate courses in ultrasonic instrumentation, analytical chemistry, instrumental analysis, advanced analysis, experimental techniques, microscopy and spectroscopy, and instrumental analysis lab.
Son Set Consultants Training, LLC
7679 N. 140th E. Ave., Owasso, OK 74055. Contact: Rick Gaffney; (918) 633-0740; e-mail email@example.com; website www.weld-procedure.com.
State of Oklahoma private vocational school that teaches Certified Weld Inspector (AWS CWI) exam preparation classes. Training is totally online and fully prepares each student for all three parts (A/B & C) of the CWI exam. We are also approved by the AWS to provide the 80 PDH training for CWI or SCWI nine-year renewal. Training includes everything the student needs with exception of a Code Book. We offer both API 1104 (current edition) code book training and AWS D1.1 (current edition) code book training.
Southern Alberta Institute of Technology
1301 16th Ave. N.W., Calgary, AB T2M 0L4, Canada. Contact: (403) 210-4313; fax (403) 284-7178; website www.sait.ca.
Courses offered in ET, MT, PT, RT, UT, engineering materials and radiation safety. Accredited test center for CGSB certification in both theory and practical exams. Also offers two-day workshops in ET, RT and UT; one-day workshops offered in MT and PT.
Special Inspections Institute
610 East Seventh Street, Charlotte, NC 28202. Contact: (855) 266-9600; e-mail firstname.lastname@example.org; website www.ndeinstitute.com.
Offering a six-month certificate program in the following nondestructive testing (NDT) methods (Level I and Level II): Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT), Radiographic Testing (RT) and Ultrasonic Testing (UT). Courses meet or exceed SNT-TC-1A.
SQS Institute of NDT
No. 95, Palakkarai Main Road, Tiruchi 620 001, Tamilnadu, India. Contact: S.Prakash, 91 944 3922723/91 996 2070098 (Chennai); e-mail email@example.com; website www.sqsndt.in.
Offers NDT Level I and II (MT, PT, RT, UT and VT) and Radiographic Film Interpretation training and certification, starting with historical background of ASME, ASNT and other NDT methods and preparatory course for ASNT NDT Level III (Basic, MT, PT, RT, UT and VT), AWS and CSWIP (with weld plate and pipe replicas demonstration) examinations.
TCR Engineering Services
Plot No. EL-182, MIDC-TTC, Electronic Zone, Behind Nelco, Mhape, Navi Mumbai-400 710, Maharashtra, India. Contact: Rohit Bafna; 91 22 67380900 99; fax: 91 22 27612044; e-mail firstname.lastname@example.org; website www.tcreng.com.
Founded in 1973, TCR conducts training and certification in accordance to SNT-TC-1A in RT, ET, VT, LT, UT, MT and PT. The training facility is equipped with latest equipments and instructors have strong onsite field experiences. Specialized training programs are also offered in time of flight diffraction, phased array, ultrasonic testing of welds to API RP2X, in-situ metallography, metallurgy for the non-metallurgist, as well as preparatory courses for AWS and CSWIP examinations. Custom training programs can also be created to adapt to given project requirements.
Technology Training, Inc.
3887 State St., Ste. 210, Santa Barbara, CA 93105. Contact: (866) 884-4338; fax (805) 715-2650; e-mail email@example.com; website www.ttiedu.com.
Specialist certificate programs in environmental engineering, dynamic testing, climatic testing, metrology, design development, project scheduling, signal processing and electromagnetic theory and testing. Distance learning or on-site.
Trinity Institute of NDT Technology
Plot No. V-22a, 2nd stage, Peenya Industrial Estate, Bangalore - 560 058, India. Contact: Ravi Kumar T./ Shiva Kumar R.; 91 98441 29439 / 99009 29439 fax: 080 283 66466; e-mail firstname.lastname@example.org; website: www.trinityndt.com.
Trinity NDT is an ISO 9001:2008 certified Institute, offers NDT Level 1, 2 courses designed to meet SNT-TC-1A requirements in ET, MT, PT, RT, UT and VT and Welding Inspector Certification courses.
Tulsa Welding School
2545 E. 11th St., Tulsa, OK 74104-3909. Contact: Dawn Bravo; (847) 525-2282; e-mail email@example.com; website www.weldingschool.com.
Master Welder, as well as ET, LT, MT, PT, RT, UT and VT training. Offers associates degrees. Job placement services available; financial aid available to those who qualify. Campuses in Oklahoma and Florida.
Granta Park, Great Abington, Cambridge CB1 6AL, England. Contact: 44 1223 899000; fax 44 1223 892588; e-mail firstname.lastname@example.org; website www.twi.co.uk.
Offers courses in ET, MT, RT and UT. A comprehensive program of short intensive courses is available. Special training courses can also be arranged and held on-site in England or overseas.
Welder Training and Testing Institute
1144 N. Graham St., Allentown, PA 18109. Contact: Michael Wiswesser; (610) 820-9551; fax (610) 820-0271; e-mail email@example.com; website www.welderinstitute.com.
Diploma programs in welding offered with AWS, ASME, API and MIL-STD certification. Job placement services available and financial aid available for those who qualify. MT, PT, UT and VT courses offered.
P.O. Box 447, Amarillo, TX 79178. Contact: John Forbis or Kim Hayes; (806) 335-4390; fax (806) 335-4267; website www.actx.edu.
Offers an NDT program leading to an AAS degree. Includes practical and classroom instruction in ET, MT, PT, RT and UT. Students can select additional work in IR, VA, reliability/maintainability and aircraft composites.
Arizona Western College
2020 S. Avenue 8E, P.O. Box 929, Yuma, AZ 85366-0929. Contact: Samuel Colton, Sr.; (928) 344-7570; fax (928) 317-6048; e-mail firstname.lastname@example.org; website www.azwestern.edu.
NDT supplements welding and manufacturing processes technology; ET 6 h; MT 12 h; PT 15 h; RT 15 h; UT 15 h; AAS welding technology; since 1967.
Central Piedmont Community College
P.O. Box 35009, Charlotte, NC 28235-5009. Contact: Richard Hooper, (704) 330-4434; e-mail email@example.com; website www.cpcc.edu/ndet
CPCC offers an Associate of Applied Science (AAS) degree in Non-destructive Examination Technology (NDET), courses include ET, MT, PT, RT, UT, VT, blueprint reading, math, physics, report writing, and NDE procdre writing. Options for diploma in Nuclear Plant Inspection (training for EPRI PDI tsting) or certificate options.
College of the North Atlantic
Port Aux Basques Campus, P.O. Box 760, 59 Grand Bay Rd., Port Aux Basques, NL A0M 1C0, Canada. Contact: John Molloy; (709) 695-3582; fax (709) 695-2963; e-mail firstname.lastname@example.org; website www.cna.nl.ca.
NDT program for Level I and II training in MT, PT, RT and UT. Also offers private and group courses in MT, PT, RT and UT for Levels I, II and III. The NDT curriculum meets the training requirements for the CGSB-9712-2000, SNT-TC-1A and ISO standards. Also offers refresher courses and workshops via the National Certifying Agency of Canada. The college is a branch examination center of the CGSB certifying agency and operates as a fully equipped facility to administer certification in both theoretical and practical disciplines.
125 S. Second St., Arkansas City, KS 67005. Contact: Joe Clasen; (620) 441-5579; e-mail email@example.com; website www.cowley.edu.
AAS degree in NDT is available. Classes required for the AAS degree include: ET 90 h; IR 25 h; MT 45 h; PT 45 h; RT 120 h; UT 120 h; VT 45 h and radiation safety 45 h. Required related classes include: physics; technical mathematics; speech; English composition; industrial materials and processes; blueprint reading; and economics. Classes available to industry on campus or onsite include: Level II; Level III refresher; AWS CWI refresher and NDT facility audits.
Don Bosco Technical Institute
1151 San Gabriel Blvd., Rosemead, CA 91770. Contact: Fred J. Padilla; (626) 940-2000; fax (626) 940-2001; e-mail firstname.lastname@example.org; website www.boscotech.edu.
High school program: NDT supplements materials science; ET 6 h; MT 9 h; PT 7.5 h; RT 27 h (incorporates radiation safety training); UT 27 h; foundry lab 18 h. Courses in mechanical testing and heat treating, materials characterization, chemical analysis. College program: certificates in radiography 120 h; ultrasonics 120 h; magnetic particle and penetrant 80 h; eddy current 40 h; weld testing 40 h; radiographic film interpretation 40 h; radiological health and safety 40 h; preparation for Level III, basic MT, PT, RT and UT, 40 h each method.
John Tyler Community College
13101 Jefferson Davis Hwy., Chester, VA 23831. Contact: Darrell Coleman; (804) 706-5073; fax (804) 796-4359; e-mail email@example.com; website www.jt.cc.va.us.
NDT supplements engineering technology/welding; MT 3 h, PT 3 h, VT 6 h, related 18 h; 13 students per year; since 1967.
Lone Star College – North Harris
NDE and Inspection Department, 2700 W.W. Thorne Blvd., Houston, TX 77073. Contact: Ron Theiss; (281) 618-5518; e-mail firstname.lastname@example.org; website www.lonestar.edu/northharris.
Specific program: ET 96 h; PT/MT 95 h; RT 48 h; UT (first part) 96 h; UT (second part) 96 h; CWI 48 h; standards 48 h. One-year certificate and two year AAS degree; 80 to 100 students per semester; since 1991.
Los Angeles Trade Technical College
400 W. Washington Blvd., Los Angeles, CA 90015. Contact: (213) 763-7323; fax (213) 763-5393; website www.lattc.edu.
NDT supplements building trades and chemical technology programs. Survey course in NDT. Career planning program available. Co-op training available.
Mohawk College of Applied Arts and Technology
P.O. Box 2034, Hamilton, ON L8N 3T2, Canada. Contact: Brad Bowman, Program Coordinator; (905) 575-1212 or (519) 759-7200 X3130; website www.mohawkcollege.ca.
Two-year NDT program.
Mohawk Valley Community College
1101 Sherman Dr., Utica, NY 13501. Contact: Anthony Malagese; (315) 792-5509; website www.mvcc.edu.
Moraine Valley Community College
9000 W. College Pkwy, Palos Hills, IL 60465-0937. Contact: Nancy Glickman, Workforce Development and Community Services; (708) 974-5386; e-mail email@example.com; website www.morainevalley.edu/nde.
Certificates in ET, MT, PT RT, UT and Illinois State approved radiation safety. Training students in NDT since 1978.
Northampton Community College
3835 Green Pond Rd., Bethlehem, PA 18020. Contact: Bill Heins, program manager, materials and welding; (610) 691-2900; fax (610) 997-8894; e-mail firstname.lastname@example.org; website www.northampton.edu.
Preparatory weld testing course for CWI test (60 h); MT 20 h; PT 12 h; RT 20 h; UT 80 h; VT 24 h. Also offers an 18 credit welding diploma consisting of 13 different welding processes. These courses can be used toward an AAS applied quality and standards degree that is transferable to a four-year college. Placement assistance is provided to all graduates. Welder certification is also available.
231 W. 6th St., Powell, WY 82435. Contact: Harold Elton; (307) 754-6156; fax (307) 754-6179; e-mail email@example.com; website www.northwestcollege.edu.
NDT supplements welding technology. Offers an AAS welding technology degree and skills certificates for welding technology, metal inert gas welding and tungsten inert gas welding.
Northwest Iowa Community College
603 West Park St., Sheldon, IA 51201. Contact: Robert Hoting; (712) 324-5061; fax (712) 324-4136; website www.nwicc.cc.ia.us.
Special emphasis in visual/optical and liquid penetrant (with an overview of radiography). Diploma program in welding offered with AWS or ASME certification. Job placement services available.
Northwest-Shoals Community College
800 George Wallace Blvd., Muscle Shoals, AL 35661. Contact: Jim Bonner; (256) 331-5244; fax (256) 389-0222; e-mail firstname.lastname@example.org; website www.nwscc.cc.al.us.
Emphasis on ET, RT, VT, optical methods, shearography and holography; IR, LT, MT, PT and VT 20 h; ET, RT and UT 150 h; shearography 80 h.
Palm Beach State College
4200 Congress Ave., Lake Worth, FL 33461. Contact: Gary Calloway; (561) 868-3547; website www.palmbeachstate.edu
This program prepares the student for entry level employment in a variety of occupations in the welding industry. The content includes communication skills, human relations, employability skills, safe and efficient work practices, reading blueprints, identifying metals and basic shop skills.
Pellissippi State Technical Community College
10915 Hardin Valley Rd., Knoxville, TN 37933-0990. Contact: Mary Kocak; (615) 694-6512; fax (615) 694-6435; website www.pstcc.edu
NDT is a course offering under the quality control option of the Department of Mechanical Engineering Technology. MT 3 h; PT 3 h; UT 4 h; VT 4 h. AAS, 50 students in quality assurance; since 1991.
San Jacinto College
8060 Spencer Hwy., Pasadena, TX 77505. Contact: Steve Rowland; (281) 476-1501 X1689; fax (281) 478-2774; e-mail email@example.com; website www.sjcd.cc.tx.us.
Specific NDT program includes ET, MT, PT, VT, CWI; standards and codes, introduction to NDT, film interpretation; since 1978. Contract courses and placement available.
Sinclair Community College
444 W. Third St., Dayton, OH 45402. Contact: Jim Houdeshell; (937) 512-2835; e-mail firstname.lastname@example.org; website www.sinclair.edu.
NDT classes in ET, MT, PT, RT and UT. These classes are designed to meet SNT-TC-1A requirements. An NDT supportive course in process metrology is also offered. These courses are part of a one-year certificate in quality engineering technology and a two year degree program in quality engineering technology. Job placement services are available.
Southeast Community College
Milford Campus, 600 State St., Milford, NE 68405. Contact: Randy Walbridge, NDT program chair; (402) 761-8346 or (800) 933-7223 X8346; e-mail email@example.com; website www.southeast.edu.
AAS in NDT since 1979. Specific NDT program; ET 220 h; MT 90 h; PT 80 h; RT 365 h; UT 330 h; VT 80 h; radiation safety 50 h; related 775 h.
St. Louis Community College at Florissant Valley
Engineering and Technology Department, 3400 Pershall Rd., Ferguson, MO 63135-1499. Contact: Ashok Agrawal, chair, Department of Engineering Technology; (314) 595-4308; fax (314) 595-2218; e-mail firstname.lastname@example.org; website www.stlcc.edu/fv.
NDT taught as part of quality control technology program; since 1973.
Materials Engineering, 201 Ross Hall, Auburn, AL 36849. Contact: Bryan A. Chin, professor and chair; (334) 844-4822; e-mail email@example.com; website www.eng.auburn.edu.
NDT supplements mechanical engineering on undergraduate level; specific NDT program on graduate level; AE 4 h; ET 2 h; LT 5 h; MT 2 h; NR 2 h; PT 5 h; RT 10 h; UT 7 h; VT 5 h; B.S., M.S., Ph.D.; 20 students per year; since 1973.
Brigham Young University
Department of Mechanical Engineering, 435 Crabtree Building, Provo, UT 84602. Contact: (801) 422-2625; fax (801) 422-0516; e-mail firstname.lastname@example.org; website www.me.byu.edu.
B.S., M.S. and Ph.D. degrees; since 1955.
California State Polytechnic University at Pomona
3801 Temple Ave., Pomona, CA 91768. Contact: (909) 869-7659; fax (909) 869-6920; website www.csupomona.edu.
NDT supplements engineering technology; ET 5 h; MT 11 h; PT 11 h; RT 35 h; UT 18 h; B.S.; 36 students per year; since 1965.
College of William & Mary
Department of Applied Science, P.O. Box 8795, Williamsburg, VA 23187. Contact: Mark Hinders; (757) 221-1519; fax (757) 221-2050; e-mail email@example.com; website www.wm.edu/as/appliedscience.
M.S. and Ph.D. in NDT are offered in applied science, with significant undergraduate and graduate research effort. Full range of graduate NDT coursework is offered.
Colorado School of Mines
Department of Metallurgical Engineering, 1500 Illinois St., Golden, CO 80401. Contact: David L. Olson; (303) 273-3955; e-mail firstname.lastname@example.org; website www.mines.edu.
Offers courses in NDT, mechanical properties of joints, fatigue and fracture, metallurgical failure analysis and statistical process control and design of experiments.
Colorado State University at Pueblo
Engineering Technology Department, 2200 Bonforte Blvd., Pueblo, CO 81001. Contact: Wolfgang Sauer; (719) 549-2884; fax (719) 549-2519; e-mail email@example.com; website www.colostate-pueblo.edu.
Offers an Introduction to NDT course; students experience NDT processes in the lab and through plant tours.
School of Civil and Environmental Engineering, 220 Hollister Hall, Ithaca, NY 14853. Contact: Mary Sansalone; (607) 255-1267; fax (607) 255-9004; e-mail firstname.lastname@example.org; website www.cornell.edu.
Research on the impact echo method for NDT of concrete and masonry.
Department of Mechanical Engineering and Mechanics, 3141 Chestnut St., Randall Hall 155, Philadelphia, PA 19104. Contact: Jonathan Awerbuch; (215) 895-2291; fax (215) 895-1478; e-mail email@example.com; website www.drexel.edu.
NDT supplements mechanical engineering; one undergraduate course and three graduate courses offered, graduate research project can relate to NDT; B.S., M.S., Ph.D.; since 1970.
Department of Engineering Technology (College of Engineering), One Drexel Plaza, 3001 Market St., Philadelphia, PA 19104. Contact: Vladimir Genis; (215) 895-0902, fax (215) 895-4988; e-mail firstname.lastname@example.org; website www.drexel.edu.
EET 333, Ultrasound Nondestructive Evaluation Course (required core course for electrical, mechanical, biomedical, and industrial engineering technology concentrations); EET 335, Acoustic Emission (technical elective for all four concentrations).
Department of Mechanical Engineering and Materials Sciences, 144A Hudson Hall, Durham, NC 27708. Contact: Phillip L. Jones; (919) 660-5324; fax (919) 660 8963; e-mail email@example.com; website www.duke.edu.
NDT supplements mechanical engineering and materials science; research in positron annihilation spectroscopy; M.S., Ph.D.
Georgia Institute of Technology
School of Materials Science and Engineering, 771 Ferst Dr., Atlanta, GA 30332. Contact: (404) 894-2888; fax (404) 894-0168; website www.gatech.edu.
NDT supplements materials engineering; ET, MT, PT, RT, UT 30 h; B.S. in materials engineering, B.S., M.S. and Ph.D. in metallurgical and ceramic engineering; 10 to 12 students per year; since 1968.
Building 1964, Rd. 4363/Block 743, Sanad, P.O. Box 26489, Adilya, Bahrain. Contact: Hassan I. Shaaban; 973 17620092; fax 973 17622230; e-mail firstname.lastname@example.org; website www.gulfuniversity.net.
Offers one course in the professional program in welding engineering and several short courses (45 h each) in MT, PT, RT and UT to qualify trainees up to Level I and II NDT technicians. In the industrial and management engineering masters program, one course is offered that gives an overview of NDT techniques.
Iowa State University
College of Engineering, 2220 Hoover Hall, Ames, IA 50011. Contact: Nicola Bowler; (515) 294-3536; fax (515) 294-7771; e-mail email@example.com;
websites: nde-minor http://www.engineering.iastate.edu/engineering-minors/nondestructive-evaluation-nde/ and nde-certificate http://www.eol.iastate.edu/graduate-certificates/nondestructive-evaluation-graduate-certificate-online.
NDE supplements undergraduate and graduate programs in aerospace engineering, engineering mechanics, electrical engineering, civil engineering, industrial engineering, mechanical engineering and materials science. Undergraduate minor and ONLINE graduate certificate in NDE available.
Johns Hopkins University
Department of Materials Science and Engineering, 206 Maryland Hall, 3400 N. Charles St., Baltimore, MD 21218. Contact: Robert C. Cammarata; (410) 516-8145; fax (410) 516-5293; e-mail firstname.lastname@example.org; website www.jhu.edu/~matsci.
Offers course that discusses NDT techniques for detecting fatigue, corrosion and thermal damage in structures and materials characterization with emphasis on microstructural characterization.
Department of Materials Science and Engineering, 1280 Main St. West, Hamilton, ON L8S 4L8, Canada. Contact: Patrick S. Nicholson; (905) 525-9140 X24977; e-mail email@example.com; website www.mcmaster.ca.
Michigan State University
College of Engineering, Chemical Engineering and Materials Science, 2527 Engineering Bldg., East Lansing, MI 48824-1226. Contact: James Lucas; (517) 432-2883; fax (517) 432-1105; e-mail firstname.lastname@example.org; website www.msu.edu.
NDT supplements metallurgy, mechanics and materials sciences; AE 4 h; ET 8 h; PT 4 h; RT 4 h; UT 4 h; VT 8 h; related 4 h; 20 students per year; since 1982.
Missouri University of Science and Technology
Department of Electrical and Computer Engineering, 224 Emerson Electric Company Hall, 301 W. 16th St., Rolla, MO 65409-0040. Contact: Reza Zoughi; (314) 341-4656; fax (314) 341-6671; e-mail email@example.com; website www.mst.edu.
NDT courses supplement programs in metallurgical and mechanical engineering. Radiation safety taught separately from RT training. Co-op training available. Career planning program available (contact David Britton). Since 1947. Microwave testing B.S., M.S., Ph.D.; since 1990.
MIT Professional Institute
77 Massachusetts Ave., Bldg. 35-433, Cambridge, MA 02139-4307. Contact: (617) 253-6128; fax (617) 258-8831; e-mail firstname.lastname@example.org; website professional.mit.edu.
Courses on assessment of existing structures using NDT methods.
1300 West Park St., Butte, MT 59701-8997. Contact: R. Bruce Madigan; (406) 496-4576; fax (406) 496-4133; e-mail email@example.com; website www.mtech.edu.
Undergraduate NDT courses covering ET, MT, PT, RT, UT and VT. Specializing in weld testing.
National Institute of Technology
Tanjore Main Rd., National Hwy. 67, Tiruchirappalli 620015, Tamil Nadu India. Contact: 91 431 2503 000; fax 91 431 2500 133; email firstname.lastname@example.org; website www.nitt.edu.
Offers a two-year Master of Technology (M. Tech) postgraduate degree in NDT. Program includes conventional and advanced NDT techniques, signal/image processing techniques, metallurgy, fieldwork and one year project work.
New Mexico State University
Optics and Materials Science, Box 3450, Las Cruces, NM 88003. Contact: Joseph Genin; (505) 646-3809; fax (505) 646-6111; e-mail email@example.com; website www.nmsu.edu.
IR, LT, RT, UT, VT and optical (holographic, speckle) testing are offered.
North Carolina State University
Department of Civil Engineering, 210 Mann Hall, Campus Box 7908, Raleigh, NC 27695-7908. Contact: Y. Richard Kim; (919) 515-7758; fax (919) 515-7908; e-mail firstname.lastname@example.org; website www.ncsu.edu.
A graduate course in NDT of infrastructures.
Center for Quality Engineering and Failure Prevention, Rm. 327, 2137 Tech Dr., Evanston, IL 60208. Contact: J. D. Achenbach, director; (847) 491-5527; fax (847) 491-5227; e-mail email@example.com; website www.northwestern.edu.
The Center is an interdisciplinary unit of the McCormick School of Engineering and Applied Sciences. Research focuses on NDT, structural reliability and prevention of premature failure.
Ohio State University
Department of Welding Engineering, 132 EJTC, 1248 Arthur E. Adams Dr., Columbus, OH 43210. Contact: Stanislav Rokhlin; (614) 292-7823; fax (614) 292-6842; e-mail firstname.lastname@example.org; website www.osu.edu.
Ph.D. in NDT is available through cooperative arrangements with various departments; the M.S. program in NDT may be given scientific or engineering emphasis; NDT is a required part of the welding engineering B.S. program; ET; MT 10 h; PT 10 h, RT 120 h; UT 120 h.
Pennsylvania College of Technology
One College Ave., Williamsport, PA 17701. Contact: Donald Praster or Michael Nau; (570) 326-3761; fax (570) 320-5264; e-mail email@example.com or firstname.lastname@example.org; website www.pct.edu.
MT 20 h; PT 10 h; RT 50 h; UT 80 h with job placement opportunities. NDT is a required part of welding technology programs; no prerequisites; 30 students per year; since 1987.
Pennsylvania State University
212 Earth and Engineering Science Bldg., University Park, PA 16802. Contact: (814) 865-4871; website www.psu.edu.
NDT (45 hours) supplements engineering science, mechanics and materials science, UT, scanning acoustic microscopy and X-ray diffraction; M.S., Ph.D.; since 1983.
Pittsburg State University
Kansas Technology Center, W223, 1701 S. Broadway, Pittsburg, KS 66762. Contact: James Otter; (620) 235-4350; fax (620) 235-4004; e-mail email@example.com; website www.pittstate.edu.
ET, MT, PT, RT, UT, VT; B.S. in engineering technology since 1975. Master’s degree in engineering technology since 1998.
Saint Louis University
Parks College of Engineering, Aviation and Technology, Department of Engineering Technology, 3450 Lindell Blvd., St. Louis, MO 63103. Contact: Beshara I. Sholy; (314) 977-8297; fax (314) 977-8388; e-mail firstname.lastname@example.org; website parks.slu.edu.
Offers a three credit hour course in materials testing; two are lecture credits and one is a lab credit. The course covers ET, MT, PT, RT and UT.
Southwest Missouri State University
Physics, Astronomy and Materials Science, 901 S. National Ave., Springfield, MO 65804. Contact: Ryan E. Giedd; (417) 836-4810; fax (417) 836-6934; e-mail email@example.com; website www.smsu.edu.
Spartan College of Aeronautics and Technology
8820 East Pine St., P.O. Box 582833, Tulsa, OK 74115. Contact: Ron Worthington; (918) 831-5368; fax (918) 831-5396; e-mail firstname.lastname@example.org; website www.spartan.edu.
NDT technician program; diploma program; ET; LT; MT; PT; RT; UT; radiation safety. Quality control associate degree program; metrology, manufacturing processes, statistical quality control and total quality management/ISO 9000; B.S. in aviation technology management.
Thomas Edison State College
101 W. State St., Trenton, NJ 08608-1176. Contact: Dean of Science and Technology; website www.tesc.edu.
Offers A.S. and B.S. degrees in NDT to students who have already earned college credit or ASNT certifications in NDT. College credit is awarded for Level II and ASNT NDT Level III certification.
Electrical and Computing Engineering Department, Cité Universitaire, Quebec, QC G1K 7P4, Canada. Contact: Xavier Maldague; (418) 656-2962; fax (418) 656-3594; e-mail email@example.com; website www.fc.ulaval.ca.
Three credit class on NDT techniques for undergraduates. Master’s degree in NDT and job placement available.
University of Alaska Anchorage
Welding and Nondestructive Testing Technology Department, 3211 Providence Dr., Anchorage, AK 99508-4670. Contact: Robert McCauley, department chair; (907) 786-6475; e-mail firstname.lastname@example.org; website www.uaa.alaska.edu.
NDT supplements welding technology; ET 30 h; MT 15 h; PT 15 h; RT 90 h; UT 60 h; VT 20 h; AAS; 30 to 40 students per year.
University of Alberta
Department of Chemical and Materials Engineering, 7th Floor, ECERF, 9107 – 116 St., Edmonton, AB T6G 2V4, Canada. Contact: Barry Patchett; (780) 492-2604; fax (780) 492-2881; e-mail email@example.com; website www.cme.engineering.ualberta.ca.
Offers quality assurance of weldments, which includes lectures and laboratories on major processes of NDT (ET, MT, PT, RT and UT).
University of Arizona
Department of Materials Science and Engineering, P.O. Box 210012, Tucson, AZ 85721-0012. Contact: David Lynch; (520) 626-6022; website www.arizona.edu.
University of California at Los Angeles (UCLA)
UCLA Extension Engineering Short Courses, 10995 Le Conte Ave., Ste. 542, Los Angeles, CA 90024. Contact: Marcus Hennessy; (310) 825-1047; fax (310) 206-2815; e-mail firstname.lastname@example.org; website www.uclaextension.edu.
University of Central Missouri
Department of Aviation, P.O. Box 800, Warrensburg, MO 64093. Contact: Fredrick J. Schieszer; (660) 543-4975; fax (660) 543-4979; e-mail email@example.com; website www.cmsu.edu.
Two NDT courses are offered, one meeting FAA requirements. The other NDT course is for aviation, automotive, manufacturing and construction majors. Courses cover the basics in metallurgy, fracture analysis, ET, MT, UT, VT and sonic analysis.
University of Cincinnati
Department of Aerospace Engineering and Engineering Mechanics, 731 Rhodes Hall, Mail Location 0070, Cincinnati, OH 45221-0070. Contact: Peter Nagy; (513) 556-3353; fax (513) 556-5038; e-mail firstname.lastname@example.org; website www.ase.uc.edu/~pnagy/NDE/.
Offers graduate courses in NDT, introduction to ultrasonics, ultrasonic NDT and electromagnetic NDT in addition to numerous other courses in related principles. M.S. thesis and Ph.D. dissertation research in NDT; special laboratory facilities in ultrasonic, electromagnetic and thermoelectric NDT.
University of Dayton
Graduate Materials Engineering Program, 300 College Park Ave., Dayton, OH 45469-0240. Contact: (937) 229-2679; fax (937) 229-3433; website www.engineering.udayton.edu.
NDT courses supplement programs in materials, mechanical and aerospace engineering. UT 30 h. Career planning program available.
University of Houston
Mechanical Engineering Department, 4800 Calhoun Rd., Houston, TX 77004-4006. Contact: Kamal Salama; (713) 743-4514; fax (713) 743-4513; e-mail email@example.com; website www.uh.edu.
Offers Fundamentals of Nondestructive Testing course that focuses on the basics of physics and applications of five NDT methods (ET, MT, PT, RT and UT). The course is intended for engineering students rather than practicing technicians.
University of Idaho
Department of Mechanical Engineering, P.O. Box 440902, Moscow, ID 83844-0902. Contact: Bob Rost; (208) 282-3500; fax (208) 885-9031; website www.uidaho.edu.
University of Idaho at Idaho Falls
Industrial Education Department, 1776 Science Center Dr., Ste. 306, Idaho Falls, ID 83402. Contact: (208) 526-1388; fax (208) 526-1552; website www.uidaho.edu/idahofalls.
NDT supplements quality assurance program; ET, MT, PT, RT, UT, VT; B.S.; 20 students per year; since 1973.
University of Illinois at Urbana-Champaign
Industrial and Enterprise Systems Engineering, 117 Transportation Bldg., 104 S. Matthews Ave., Urbana, IL 61801. Contact: Henrique Reis; (217) 333-1228; e-mail firstname.lastname@example.org; website www.uiuc.edu.
NDT supplements engineering degree. Related courses include fundamentals of NDT and fundamentals of engineering acoustics and ultrasonics. Radiation safety incorporated into RT training. Career planning program available. Since 1987.
University of Louisville
Electrical Engineering Department, J. B. Speed Hall, Ste. 221, Louisville, KY 40292. Contact: Peter Aronhime; (502) 588-6312; fax (502) 852-6807; e-mail email@example.com; website www.louisville.edu.
Computer aided testing of analog electronic circuits.
University of Massachusetts Dartmouth
Ultrasonic NDE Laboratory, c/o ECE Department, 285 Old Westport Rd., North Dartmouth, MA 02747. Contact: C. H. Chen; (508) 999-8475; fax (508) 999-8489; e-mail firstname.lastname@example.org; website www.umassd.edu.
The laboratory sponsors technical seminars, short courses and summer institutes on NDT related topics.
University of New Brunswick
Department of Mechanical Engineering, P.O. Box 4400, 15 Dineen Dr., Fredericton, NB E3B 5A3, Canada. Contact: Esam Hussein; (506) 447-3105; fax (506) 453-5025; e-mail email@example.com; website www.me.unb.ca.
A four credit senior technical elective course is offered. The course covers AE, UT, magnetic flux leakage, eddy current, radiography and microwave techniques. A design-oriented project is assigned.
University of New Hampshire
Department of Mechanical Engineering, W101 Kingsbury Hall, 33 Academic Way, Durham, NH 03824. Contact: David Watt; (603) 862-2555; e-mail firstname.lastname@example.org; website www.unh.edu/mechanical-engineering.
University of North Carolina at Charlotte
Department of Engineering Technology, 9201 University City Blvd., Charlotte, NC 28223-0001. Contact: Ronald L. Priebe; (704) 535-1838; e-mail email@example.com; website www.uncc.edu.
Offers an experimental stress analysis laboratory course that includes the following NDT components: MT, PT, brittle lacquer, electrical resistance strain gages and transmission photoelasticity.
University of North Dakota
P.O. Box 8359, Grand Forks, ND 58202. Contact: George Bibel, professor; (701) 777-2571; e-mail firstname.lastname@example.org; website www.und.nodak.edu.
NDT supplements mechanical engineering, NDT covered in engineering materials course.
University of Rhode Island
Department of Ocean Engineering, 217 Sheets Building, Narragansett Bay Campus, Narragansett, RI 02882. Contact: (401) 874-6139; fax (401) 874-6837; e-mail email@example.com; website www.oce.uri.edu.
NDT is included in a sequence of courses in acoustics; emphasis on ultrasonics including wave propagation, transducers and signal processing.
University of Rochester
Department of Electrical and Computer Engineering, 518 Computer Studies Bldg., Rochester, NY 14627-0126. Contact: Kevin Parker, dean, school of engineering and applied sciences; (716) 275-4151; fax (716) 273-4919; e-mail firstname.lastname@example.org; website www.rochester.edu.
NDT coursework integrated into graduate courses on ultrasonics, transducers, signal processing and medical imaging systems; AE 2 h, RT and UT 4 h.
University of Southern California
Department of Aerospace and Mechanical Engineering, OHE 430, Los Angeles, CA 90089-0241. Contact: Terence G. Langdon; (213) 740-0491; fax (213) 740-8011; e-mail email@example.com; website www.usc.edu.
University of Texas at El Paso
Department of Metallurgical and Materials Engineering, 500 W. University Ave., El Paso, TX 79968. Contact: Stephen W. Stafford; (915) 747-6930; fax (915) 747-8036; e-mail firstname.lastname@example.org; website www.utep.edu.
NDT topics covered in two courses; topics covered include AE, ET, MT, PT, RT and UT, with emphasis on applications in failure analysis.
University of Toledo
Department of Mechanical Engineering, Nitschke Hall 4056, Toledo, OH 43606. Contact: Mohamed Samir Hefzy, biomechanics laboratory; (419) 530-8234; fax (419) 530-8206; e-mail email@example.com; website www.utoledo.edu.
University of Wisconsin Milwaukee
University Center for Continuing Education, College of Engineering and Applied Science, 161 W. Wisconsin Ave., Ste. 6000, Milwaukee, WI 53203. Contact: Murali Vedula; (414) 227-3121; e-mail firstname.lastname@example.org; website www.uwm.edu.
Mail Code 0219, Blacksburg, VA 24061. Contact: John C. Duke, Jr.; (540) 231-6063; fax (540) 231-4574; e-mail email@example.com; website www.eng.vt.edu.
NDT supplements programs in engineering science and mechanics, materials science, engineering, aerospace, biological systems, chemical, civil, computer, electrical, environmental, mechanical, mining and mineral and ocean engineering.
West Virginia University
Department of Civil and Environmental Engineering, 645 Engineering Sciences Building, P.O. Box 6103, Morgantown, WV 26506-6103. Contact: Udaya Halabe; (304) 293-3031 X2617; fax (304) 293-7109; e-mail firstname.lastname@example.org; website www.cee.cemr.wvu.edu.
NDT of structures and materials (3 h), graduate course offered each spring semester; since 1991. Course topics include infrared thermography, dynamic characterization, seismic techniques, ultrasonics and ground penetrating radar.
Academy of Infrared Training
702 Kentucky Street, Ste. 720, Bellingham, WA 98225; (888) 673-4743; fax (604) 516-6674; e-mail email@example.com; website www.infraredtraining.net.
An independent training institute dedicated to providing a high standard of infrared instruction.
Advanced Corrosion Training Center
75 Center Cir., Sulphur, LA 70663. Contact: (337) 313-6038 ; fax (337) 625-9284; website: www.advancedcorrosiontrainingcenter.com .
Offers comprehensive NDT training, hands-on exercises and qualification examinations for your personnel. List of courses and full schedule available on website.
Aerospace Inspection Training, Ltd.
Hangar A, Norwich Airport, Norwich, Norfolk NR6 6EG, England. Contact: Barbara Manson, center administrator; 44 1603 426165; fax 44 1603 424019; e-mail firstname.lastname@example.org; website www.aerospacendt.co.uk.
ISO 9001 approved NDT training and examination center. Training courses and examinations meet the recommendations of SNT-TC-1A, NAS 410, EN 4179 and ISO 9712. Approved PCN examination center.
American Petroleum Institute
1220 L St. N.W., Washington, DC 20005-4070. Contact: NDT training manager; (202) 682-8000; website www.api.org.
Meadowbank Rd., Rotherham, South Yorkshire S61 2NF, England. Contact: David Betts, course director; 44 1709 560459; fax 44 1709 557705; e-mail email@example.com; website www.ruanetpo.com.
Offers training certification and Level III services via three locations in England. Courses include ET, MT, PT, RT, UT, thermography, weld testing and cathodic protection. Single and multiple courses are offered ranging from one day to 52 weeks and most services can be provided worldwide.
9639 Kinsman Rd., Materials Park, OH 444073. Contact: John Cerne; (440) 338-5417; fax (440) 338-4634; e-mail firstname.lastname@example.org; website www.asminternational.org/education.
Offers classroom and laboratory classes in metallurgy, failure analysis, corrosion, metallography, fractography and more.
American Society for Nondestructive Testing, 1711 Arlingate Lane, P.O. Box 28518, Columbus, OH 43228-0518; (614) 274-6003 or (800) 222-2768; fax (614) 274-6899; website www.asnt.org.
Offers regular refresher courses for those studying for Level III certification.
100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428-2959. Contact: (610) 832-9603; website www.astm.org.
Atlantic NDT Training
24 Flat Rock Rd., Branford, CT 06405. Contact: Gary L. Chapman; (203) 481-4041; e-mail email@example.com; website www.atlanticndttraining.com.
Twenty-five years of experience in training and administering examination services both in-plant and in public courses in accordance with SNT-TC-1A and NAS-410 requirements. Courses offered in ET, MT, PT, RT, UT and VT.
Applied Technical Services, 1049 Triad Ct., Marietta, GA 30062. Contact: (770) 423-1400; fax (770) 514-3299; e-mail firstname.lastname@example.org; website www.atslab.com/nondestructive-testing/ndt-training.php.
Education Department, 550 NW LeJeune Rd., Miami, FL 33126. Contact: (305) 443-9353; fax (305) 443-7559; website www.aws.org.
Baker Training Services
22 Reservoir Park Dr., Unit #1, Rockland, MA 02370. Contact: Robert Raimondi; (781) 871-4458; mobile: (617) 378-2067; e-mail email@example.com; website www.bakertrainingservices.com.
Baker Training Services (BTS) is a division of Baker Testing Services, Inc. which is an independent laboratory providing consulting, material analysis, field testing, and in-service inspections for structural reliability and quality since 1979. BTS, the training division, will provide NDT training and align our content with material found in the ANSI/ASNT CP-105-2011 Standard. We are most interested in providing training for the newer and more specialized Advanced NDT inspection techniques such as ultrasonic Phased Array and Time of Flight Diffraction. We offer classroom and hands-on training at our offices or can provide onsite training at a customer’s site location.
Birring NDE Center, Inc.
515 Tristar Drive, Houston, Texas 77598. Contact: Anmol Birring; (832) 533-8366; fax (281) 488-8485; e-mail firstname.lastname@example.org; website www.nde.com/training.
NDT Level I and II training in MT, PT, UT, VT and ET as per SNT-TC-1A.
BRL Consultants, Inc.
219 W. Rhapsody, San Antonio, TX 78216. Contact: Bryan Lancon; (210) 341-3442; fax (210) 341-2844; e-mail email@example.com; website www.brlconsultants.com.
Offers training for Levels I, II and III refresher courses.
Business Industrial Network
2 Cityplace Dr., Ste. 200, St. Louis, MO.63141; Contact: (573( 547-5630; fax (314) 584-7099; e-mail firstname.lastname@example.org; website www.bin95.com/thermographer/infrared-thermography-training.htm .
Established in 1995, BIN95 provides an online infrared training center for online infrared training and certification and custom IR NDT online certificate courses.
Canadian Institute for NDE
135 Fennell Ave. W., Hamilton, ON L8N 3T2. Contact: Sharon Bond, training manager; (905) 387-1655 X222; fax (905) 574-6080; e-mail email@example.com; website www.cinde.ca.
Offers intensive day and night school courses in NDT disciplines and applications. The NDT courses meet CAN/CGSB-48.9712 requirements to Levels I, II and III.
Coast to Coast USA NDE Services
27501 S.W. 95 Ave., Wilsonville, OR 97070. Contact: Wesley H. Weber; (503) 682-8783; fax (503) 682-8727; e-mail firstname.lastname@example.org; website www.coastnde.com.
Offers Level I/II courses in MT and UT in accordance with SNT-TC-1A and NRCAN 48.9712-2000. Pipeline integrity classroom and field training also offered.
241 Ethan Allen Hwy., Ridgefield, CT 06877. Contact: Diana Hretz, (203) 438-9696 X218; fax (203) 438-1794; e-mail email@example.com; website www.dapcondt.com.
Offers courses in UT that meet or exceed the requirements of SNT-TC-1A, CP-189 and NAS-410, and seminars and specialty courses such as rail flaw detection, high pressure cylinder testing and railway wheel testing.
Decibel NDE Inspections & Training Institute
1st Floor Plainfield Business Enclave, near Civil Court, Pattambi, Palakkad District, Kerala, India – 679303; 0091 9387674153, 0091 9349122467, 0091 9895027721, or 0091 8089000250; e-mail firstname.lastname@example.org; website www.decibelnde.com; Skype ID decibelnde; Facebook Official Fan Page www.facebook.com/decibelglobal.
Offers a full schedule of courses in RT, RTFI, UT, MT, PT, VT, TOFD, Phased Array, LRUT, AUT, ET, and LT at each office, as well as onsite courses. Courses meet or exceed the requirements of SNT-TC-1A, CP-189, ISO 9712 and NAS-410/EN 4179. Also offers seminars and specialty courses such as alternating current field measurement and certified welding inspector preparation. Examination services and Level III support services are also offered.
Decibel - Remote Training Center
T.C. No. 1/1374(12), 2nd Floor, Kottakath Building, Poonthi Rd Kumarapuram, Thiruvanathapuram - 695011; 0091 8129508881; e-mail email@example.com; website www.decibelnde.com.
Offers a full schedule of courses in RT, RTFI, UT, MT, PT, VT, TOFD, Phased Array, LRUT, AUT, ET, and LT at each office, as well as onsite courses. Courses meet or exceed the requirements of SNT-TC-1A, CP-189, ISO 9712 and NAS-410/EN 4179. Also offers seminars and specialty courses such as alternating current field measurement and certified welding inspector preparation. Examination services and Level III support services are also offered.
Eclipse Scientific, Inc.
97 Randall Drive, Unit 2, Waterloo, Ontario, Canada N2V 1C5. Contact: Cameron Feil; (800) 490-1072 or (519) 886-6717; fax (519) 886-1102; e-mail firstname.lastname@example.org; website http://www.eclipsescientific.com/Training/index.html.
Offers EN473 and ISO9712 Training & Certification, ISO/CGSB 9712/SN-TC-1A Training & Certification, Instrument Specific Training, and more.
EPRI NDE Center
P.O. Box 217097, Charlotte, NC 28221. Contact: Sherryl R. Stogner, registrar/testing coordinator; (704) 547-6174; fax (704) 547-6028; e-mail email@example.com; website www.epri.com.
Focus on NDT in the power industry including UT, VT, NDT for engineers and specialized and advanced NDT methods (phased array ultrasonic testing).
Foerster Instruments, Inc.
140 Industry Dr., RIDC Park West, Pittsburgh, PA 15275. Contact: Sean Harris; (412) 788-8976 X2155; fax (412) 788-8984; e-mail firstname.lastname@example.org; website www.foerstergroup.com.
Offers eddy current courses with emphasis on operating Foerster’s instruments and various applications.
Gavade Institute of Non-Destructive Testing & Training (GINDT)
710/3A Ground Floor, 1st Cross, Swami Vivekananda Rd., Near Brahma Kumaris Om Shanthi, Opposite to Shri Guru Store. Angol, 34 No. Marathi Government School Bus Stop Belgaum - 590 006
Karnataka State, India. Contact: Sunil B. Gavade; 091 831 2484060 or 091 9632916690 (mobile); fax 091 831 2469074; e-mail email@example.com; website www.gindt.co.in.
NDT/NDE testing, NDT procedure, inspection, consultancy and training. Third party inspection of static and rotating equipment. New construction and in-service repair work. Welding inspection. In-service inspection. Fitness-for-service assessment. Corrosion and coating inspection. Metallurgy. Oil and gas exploration.
GE Inspection Technologies
50 Industrial Park Rd., Lewistown, PA 17044. Contact: (866) 243-2638 or (717) 447-1231; fax (866) 836-2033; e-mail firstname.lastname@example.org; website www.geinspectiontechnologies.com.
Offers Level I/II courses in ET, RT and UT and additional courses in thickness testing, ultrasonic weld testing, spot weld testing and digital radiography.
GE Inspection Technologies, Everest RVI Products and Services
199 Hwy. 206, Flanders, NJ 07836-4500. Contact: (866) 243-2638 or (717) 447-1231; fax (866) 836-2033 or (717) 242-2606; e-mail email@example.com; website www.geinspectiontechnologies.com.
Offers comprehensive training in VT, remote VT and VT Level III refreshers. Specialized training is also offered for specific types of remote VT equipment.
Harman NDE Institute
2380 Wyecroft Rd., Unit 23, Oakville, ON L6L 6W1, Canada. (905) 825-1050; fax (905) 825-1056; e-mail firstname.lastname@example.org; website www.harmannde.com.
Offers scheduled courses at Institute in MT, PT, RT, UT, Certified Exposure Device Operator (CEDO). Courses meet or exceed the requirements of CGSB 48.9712, CNSC, ISO 9712, SNT-TC-1A, CP-189 and NAS 410. Other related courses are math for NDT, EMC, film interpretation for quality control personnel, ultrasonic weld testing, ultrasonic thickness testing, auditing NDT systems, and NDT principles and application. Courses onsite as well. NDT Level III consultancy and quality assurance services are also offered.
Northeast: 1 Spar Yard St., New London, CT 06320. Contact: (860) 437-1003; fax (860) 437-1014; e-mail email@example.com. Pacific: 2051 East Cerritos Ave., Ste. 8A, Anaheim, CA 92806. Contact: (714) 956-2274; fax (714) 956-2277; e-mail firstname.lastname@example.org. South Central: 16631 W. Hardy St., Houston, TX 77060. Contact: (281) 873-0980; fax (281) 873-0981; e-mail email@example.com; website for all locations www.hellierndt.com. Call toll-free (888) 282-3887.
Offers a full schedule of courses in ET, MT, PT, RT, UT and VT at each office, as well as onsite courses. Courses meet or exceed the requirements of SNT-TC-1A, CP-189 and NAS 410. Also offers seminars and specialty courses such as alternating current field measurement and certified welding inspector preparation. Examination services and Level III support services are also offered. Hellier is an ASNT Authorized Examination Center.
Hudson Technical Training Center
1200 Watercrest Way, Cheswick, PA 15024. Contact: Edward Zollner; (724) 275-9970 X246; e-mail firstname.lastname@example.org.
Offers an 11-week nondestructive testing and quality control technologies training program.
Industrial Training International, Inc.
9428 Old Pacific Hwy., Woodland, WA 98674. Contact: Carrie Camacho; (360) 225-1100; fax (360) 225-1122; e-mail email@example.com; website www.wrrc.com.
A certified inspector program covering wire rope, wire rope slings, synthetic web slings, chain slings and rigging hardware; visual and dye penetrant testing procedures.
Institute of Non-destructive Testing & Training
401/402, B Wing, Pacific Towers, Sagar City, Andheri (West) Mumbai 400058, India. Contact: 91 22 26714543; fax 91 22 26714543; e-mail firstname.lastname@example.org, email@example.com, firstname.lastname@example.org; website www.indtt.org.
Offers training for Levels I, II and III refresher courses in AE, ET, IR, LT, MT, PT, RT, UT and VT; UT API-RP-2X TKY training; radiation safety; time of flight diffraction and phased array training; AWS CWI; C-SWIP training; and API certification preparatory courses for API 510, API 653 and API 570.
Institute of Infrared Thermography
508–1088 Sunset Dr., Kelowna, BC V1Y9W1, Canada. Contact: (250) 762-8131; e-mail email@example.com; website www.infraredinstitute.com.
Courses offered on Level I, II and III Infrared Thermography in compliance with SNT-TC-1A, ISO 9712, EN 473. Certificates of training and continuing education credits are provided upon successful completion of each course. Classes are offered globally; onsite courses can be arranged.
International Pipe Inspectors Association, 8001 Almeda-Genoa Rd., Houston, TX 77075. Contact: Joseph L. Mackin; (713) 910-5550; fax (713) 910-5151; e-mail firstname.lastname@example.org; website www.ipia.org.
Special emphasis on oil country tubular goods testing training. Courses offered include: used drill pipe testing; bottom hole assembly; casing and tubing thread testing; NDT 6000 testing; MT Level I/II; UT Level I/II. Other courses are also available.
Kraft Technology Resources
12001 Lorien Way, Oklahoma City, OK 73170-4734. Contact: Karl E. Kraft; (405) 819-7786; fax (405) 692-6154; e-mail email@example.com; website www.ndtbootcamp.com
Offers Level III examination preparation courses in Basic, ET, MT, PT, RT, UT and VT. Also offers courses in NDT math and metallurgy.
Laser Technology, Inc.
1055 West Germantown Pike, Norristown, PA 19403. Contact: Ben Feferman; (610) 631-5043; fax (610) 631-0934;e-mail firstname.lastname@example.org; website www.laserndt.com.
Courses offered on Level I, II and III laser shearography/holography in compliance with SNT-TC-1A. Certificates of training and continuing education credits are provided upon successful completion of each course. Classes are offered in Norristown, Pennsylvania; onsite courses can be arranged.
Lavender International NDT Consultancy Services, Ltd.
Unit 7 Penistone Railway Station, Sheffield S36 6HP, England. Contact: Steve Lavender; 44 1226 765769; fax 44 1226 760707; e-mail email@example.com; website www.lavender-ndt.com.
Training and examination services to SNT-TC-1A, ISO 9712, EN 473, NAS 410 and EN 4179 for ET, MT, PT, RT, UT and VT. Specific emphasis on emerging technologies in UT, including advanced programs in time of flight diffraction and phased array. Sectors covered include aerospace, power, oil and gas, and defense.
Leak Testing Specialists, Inc.
5776 Hoffner Ave., Ste. 304, Orlando, FL 32822. Contact: Tony Heinz; (407) 737-6415; fax (407) 737-6416; website www.leaktestingspec.com.
Special emphasis on leak testing courses, including Levels I, II and III, bubble testing and mass spectrometer leak testing.
Mistras Group, Inc.
New Jersey: 195 Clarksville Rd., Princeton Junction, NJ 08550; (609) 716-4049 Fax: (609) 716-4145; firstname.lastname@example.org. Ohio: 600 Kaiser Dr., Building 241, Heath, OH 43056; (740) 788-9188; Fax: (740) 788-9189; email@example.com. Utah: 786 W. 600 N. North Salt Lake, UT 84054; (801) 683-3450; Fax: 1(801) 397-1019; firstname.lastname@example.org. Washington: 7820 South 210th St., Suite 110, Kent, WA 98032; (206) 764-8123; Fax: 1(206) 764-8124; email@example.com; website www.mistrasgroup.com.
NDT Topics: (VT) Visual, (MT) Magnetic Particle, (PT) Liquid Penetrant, (UT) Ultrasonics, (RT) Radiography (AE) Acoustic Emission, (ET) Eddy Current, Film Interpretation, and Radiation Safety. All courses meet or exceed industry standards (ASNT SNT-TC-1A, CP-189 and NAS 410) as applicable. Please inquire about needs for special classes not listed in course schedule, onsite training or refresher/testing.
Munson NDT Consultants
1607 Melrose Trace Ln., Crozier, VA 23039-2442. Contact: (804) 784-4122; fax (804) 784-2232; e-mail firstname.lastname@example.org.
Offers Level II courses in ET, MT, PT and UT; also courses in radiation safety.
National Centre for Non-destructive Testing
Plot No. 234, Street No.7, Industrial Area, Sector I-9/2, Islamabad, Pakistan. Contact: 0092 51 9257347 54; fax 0092 51 9258642; e-mail: email@example.com.
Offers training and certification courses in accordance with SNT-TC-1A, ISO 9712 in ET, MT, PT, UT, RT and VT. Also offers specialized courses on Radiation Safety in Industrial Radiography, Interpretation of Radiographs, Understanding of Radiographic Testing in accordance with ASME Code, Digital Industrial Radiography, Ultrasonic Time of Flight Diffraction (TOFD) and Phased Array (PA) Techniques, Understanding of Ultrasonic Testing in accordance with ASME Codes, Weld Inspection by using Digital Flaw detectors, Crack depth and Ultrasonic Thickness Measurements, Fracture Mechanics and ASME/API Based Fitness for Service (FSS) Assessment, API-579 and API-510, Material Characterization, NDT of Boilers, NDT of Ferromagnetic Steel Ropes, Signal Analysis for Eddy Current, Remote Field and Magnetic Flux Leakage Techniques, Infrared Thermography and Acoustic Emission Testing and its Application.
NDE Professionals, Inc.
13339 N.E. Airport Way, Ste. 100, Portland, OR 97230. Contact: John Clark; (503) 287-5255; fax (503) 287-5992; e-mail firstname.lastname@example.org; website www.qnpi.com.
Quality assurance and quality control NDT training courses; MT, PT, RT, UT and VT Levels I and II training programs and Level II tutoring.
NDT Classroom, Inc.
710 Main Street, Buffalo, NY 14202. Contact: Bill Cronberger; (716) 262-8870; fax (716) 875-7162; e-mail email@example.com; website www.ndtclassroom.com.
Our online training courses were developed based on ANSI/ASNT CP-105, meeting training recommendations described in SNT-TC-1A and also used for NAS-410. We offer a complete suite of NDT basic methods with benefits that far exceed classroom training sessions. Our unique programs are a 100% video-based, featuring expert instructors and clear, close-up demonstrations of equipment and procedures to maximize student engagement and maintain attention. Course offerings include: Eddy Current I/II, Magnetic Particle Testing I/II, Penetrant Testing I/II, Radiographic Testing I/II, Visual Testing I/II, Ultrasonic Testing I/I, UT Thickness Testing, Radiation Safety.
NDT Technology Pvt, Ltd.
Above State Bank of Travancore, M. C. Road, Pallom, Kottayam 686012, Kerala, India. Contact: P.K. Kurien; 0091 481 2361887; fax 0091 481 2362482; e-mail firstname.lastname@example.org; website www.ndttech.org. Also see us at: www.facebook.com/ndttech.
Offers training and certification in accordance to SNT-TC-1A in, ET, MT, PT, RT and UT and have an inventory of manual and automated equipment, reference materials, and a library with print and electronic data. Also offers short, intensive training courses in ultrasonic time of flight diffraction, ultrasonic immersion testing, ultrasonic testing of welds to API RP2X, radiographic film interpretation, and preparatory courses for AWS and CSWIP examinations.
Nondestructive Testing Technology Center
P.O. Box 1485, Al-Khobar 31952, Saudi Arabia. Contact: M.S. Al-Suhaim, president; 966 3 812 3905; fax 966 3 812 3910; e-mail email@example.com.
Courses offered in ET, IR, MT, PT, RT, UT, VT and radiographic film interpretation. Welding inspector training and certification is offered in cooperation with the American Welding Society. Other programs include API certification preparatory courses, coating inspection, cathodic protection, corrosion, vibration analysis, condition monitoring and general materials engineering courses.
1328 E. 43rd Court, Tulsa, OK 74105. Contact: NDT training manager; (800) 597-5460; fax (918) 746-0925; website www.noria.com.
Odyssey Technology Corporation
2987 Babcock Blvd., Ste. 101, Pittsburgh, PA 15237. Contact: Carol Sansieri; (412) 364-9511; fax (412) 364-9521; e-mail firstname.lastname@example.org; website www.odysseytest.com.
ET Level I/II.
Petroleum Institute for Continuing Education
Unit 201, 1228 Kensington Rd. N.W., Calgary, AB T2N 3P7, Canada; (403) 284-1250; fax (403) 770-8252; website www.peice.com.
PQT Services, Inc.
806 Botany Rd., Greenville, SC 29615. Contact: William Plumstead, Sr.; (864) 292-1115; fax (864) 292-0228; e-mail email@example.com; website www.pqt.net.
Offers traditional and online courses in MT, PT, RT, UT and VT to satisfy initial training requirements for all levels of personnel qualification. Also offers training in radiation safety. Certificates of training and continuing education credits are provided upon successful completion of each course.
Quality Control Company
3 Nablus St., Mohandessin, Cairo, Egypt. Contact: Abdel Hamid Hassanein or Ahmed Afifi; 20 2 3456 809; fax 20 2 3456 037; e-mail firstname.lastname@example.org.
Offers courses in MT, PT, RT, UT and VT.
Reinhart and Associates, Inc.
P.O. Box 140105, Austin, TX 78714. Contact: Eugene R. Reinhart; (512) 834-8911; fax (512) 834-1266; e-mail email@example.com; website www.reinhartassoc.com.
Offers courses for Basic, ET, MT, PT, RT, UT and VT; all levels including Level III refreshers. Also offers technical seminars including NDT for engineers and power plant engineers, design for automated NDT systems and imaging of concrete. Classes are offered in Austin, San Antonio and Houston.
228 Maple Ave., Johnstown, PA 15901. Contact: Fred E. Raco, Jr.; (814) 535-5448; fax (814) 535-5667; website www.rndt.net.
Offers Level I, II and III courses in AE, MT, PT, RT, UT and VT.
Satyakiran School of Nondestructive Testing
BU-3, SFS, Outer Ring Road, Pitampura, Delhi, India 110034; 91 11 27345252, 27342948; fax 91 11 25278008; e-mail: firstname.lastname@example.org; website www.satyakiran.com.
Training in Levels I and II as per SNT-TC-1A, NAS 410, IS 13805 and EN473.
SGS NDT Training & Examination Center SGS-CSTC China
2F, Building 8, 69 Kangqiao Industrial Park, 1159 East Kangqiao Road, Pudong District, Shanghai 201319, China. Contact: 86 21 6818 3905; e-mail email@example.com; website www.sgs.com/ndt-training.
Offers basic NDT awareness, and Level I, II and III training courses in MT, PT, RT, UT, VT and time of flight diffraction.
SGS Venezuela, S.A.
Av. Francisco de Miranda, Edif Centro Seguros la Paz, Piso 6 Lado Norte, La California, Caracas, Venezuela. Contact: Edgardo Ferrer, 58 212 273 0900; fax 58 212 232 7998; e-mail firstname.lastname@example.org; website www.ve.sgs.com.
Offers Level I and II training courses in MT, PT, RT and UT.
10306 Technology Terrace, Bradenton, FL 34211. Contact: (941) 907-9128; e-mail email@example.com; website www.iriss.com.
Safety and Maintenance Academy of Reliability Technologies offers Level I IR Electrical, Level II IR Electrical, Energized Electrical Maintenance, NFPA 70E certificates and more.
The Snell Group
322 N Main St., Ste. 8, Barre, Vermont 05641. Contact: (800) 636-9820; (802) 479-7100; fax (802) 479-7171; e-mail: firstname.lastname@example.org; website www.thesnellgroup.com.
Offers courses in NDT using active thermography. Predictive maintenance training in thermography for Levels I, II and III, including specialty classes in electrical, mechanical and building applications, are also available.
Society for the Advancement of Material and Process Engineering
1161 Parkview Dr., Ste. 200, Covina, CA 91724-3748. Contact: (626) 331-0616; fax (626) 332-8929; e-mail email@example.com; website www.sampe.org.
Source Company for Training and Development (SCTD)
Iraq – Baghdad, Al Jadria – Street lead to Baghdad University; 00964 7716178161; e-mail firstname.lastname@example.org; website www.facebook.com/source.irq.
Source Company for Training and Development (SCTD) was founded to assist and improve the skills of Iraqi engineers and technicians that specialize or want to specialize in the field of nondestructive testing, welding processes and thermal & applied design of equipment, such as pressure vessels, heat exchangers, tanks and structures and others. SCTD has a staff of professors, assistant professors and M.Sc. degrees from Baghdad University and also from other universities in Iraq. Offers examinations for ASNT Level I, II, III.
Stein Engineering Services, Inc.
5602 E. Monte Rosa, Phoenix, AZ 85018-4646. Contact: Peter K. Stein; (800) 632-7797 or (480) 945-4603; fax (480) 945-4603; e-mail email@example.com; website home.earthlink.net/~meas.sys/.
Measurement systems engineering.
Structural Integrity Associates, Inc.
11515 Vanstory Dr., Ste. 125, Huntersville, NC 28078. Contact: Vicki Douglass; (704) 597-5554; e-mail firstname.lastname@example.org; website www.structint.com.
Offers courses on practical application of ASME Section III; finite element analysis for utilities; corrosion and corrosion control in nuclear power plants; materials, fabrication, welding and examination requirements; metal fatigue, fracture mechanics and flaw evaluation in the nuclear power industry; and hot topics.
Test NDT, LLC
193 Viking Ave., Brea, CA 92821. Contact: Richard Harrison; (714) 255-1500; fax (714) 255-1580; e-mail email@example.com; website www.testndt.com.
Specializes in NDT training, offering Level I, II and III courses in ET, MT, PT, RT, UT and VT, radiation safety and phased array training. Special seminars on topics such as weld testing, etch testing, bond testing and composites testing are also given. Onsite training is offered. All instructors are ASNT NDT Level III certified; courses are supplemented with structured hands-on exercises. Class size is limited to ensure good individual attention. Qualification examinations and Level III outside agency services available.
195 Frances Ave., Cranston, RI 02910-2211. Contact: Arthur Haley; (401) 467-6454; fax (401) 467-2398; e-mail firstname.lastname@example.org; website www.thielsch.com.
Offers Level I and II courses in MT, PT, UT and VT in accordance with SNT-TC-1A guidelines.
T.P. Group S.A. (Technical Partner Group)
Calle 30 A # 6-22 Edificio San Martín, oficina 2403 Bogotá, Colombia. Contact: Enrique Molano, general manager; PBX: (571) 5615596 X110; email email@example.com; website www.tpgroupsa.com.
Offers schedule of public and/or privates onsite theoretical and practical courses in VT, MT, PT, RT, UT, PA, and TOFD among others. Courses meet or exceed the requirements of SNT-TC-1A. Other special courses available on demand. Cursos teórico-prácticos en campo en español en toda Latinoamérica.
Al Mansour, Baghdad, Iraq. Contact: Osama Fadhel; 009647723277810; e-mail firstname.lastname@example.org; website www.trainee-world.net.
This institute runs NDT seminars and offers Level I, Level II, and Level III preparatory courses to ASNT exams, with five methods (UT, RT, MT, PT, VT). Additional welding inspection courses, with API course seminars planned. Safety courses in accordance with NEBOSH and IOSH requirements with practical focus.
UK Institute of Infrared Thermography
2 Midland St., Widnes, Cheshire WA8 6JZ, England; 44 151 424 4060; fax 44 151 127 4694; e-mail email@example.com; website www.infraredinstitute.co.uk.
University of Ultrasonics
2159 Rocky Ridge Rd., Ste. 103, Birmingham, AL 35216. Contact: (205) 822-5203. Houston: 12805 Gulf Freeway, Houston, TX 77034. Contact: (281) 741-0571; email firstname.lastname@example.org; website www.universityofultrasonics.com.
Provides ultrasonic (UT) training and consulting to structural, power generation, petroleum, defense, and aerospace industries. Focus includes Level I and II Basic Skills, Advanced Conventional Techniques, Phased Array (PAUT) and Time of Flight Diffraction (TOFD). Training courses are developed to meet and exceed the training syllabus CP-105 and are in accordance with SNT-TC-1A and CP-189.
US Air Inspection Department, Greater Pittsburgh International Airport, Pittsburgh, PA 15231. Contact: Ray Leseck; (412) 472-7251; fax (412) 472-4620; e-mail email@example.com; website www.usairways.com.
Offers ET (40 h), MT (16 h), PT (16 h), RT (40 h), UT (40 h) and composite testing (24 h) courses. Also offers a recurrent training class of 4 h for each method.
Veritec Sonomatic, Ltd.
Marsham House, The Village, Birchwood Park, Warrington, Cheshire WA3 6GN, England. Contact: 44 1925 414000; fax 44 1925 655595; e-mail firstname.lastname@example.org; website www.vsonomatic.com.
Offers training in the time of flight diffraction technique. SNT-TC-1A certification is offered in conjunction with Argyll-Ruane, Ltd.
WENS Quality Assurance Pvt, Ltd.
No. 14, Jai Hind Nagar, Manali Express Hwy., Chennai, India 600 057. Contact: 91-44-25727574; fax 91-44-25734322; e-mail email@example.com; website www.wensgroup.com.
Providing Courses in ET, IR, LT, MT, PT, RT, UT and VT in accordance with SNT-TC-1A.
WorldSpec - A Division of Hellier NDT Training
16631 W. Hardy Rd., Houston, TX 77060-6239. Contact: (877) 506-7773; e-mail firstname.lastname@example.org; website www.worldspec.org.
Online nondestructive testing courses that meet SNT-TC-1A, AWS, NAS-410, CP-189, CGSB, CWB and ISO theory-training standards. A unique, innovative learning format for the NDT initiate, inspector, welder or industrial technician.
8226 Bracken Pl. S.E., Ste. 100, Snoqualmie, WA 98065. Contact: (800) 643-1771 or (425) 974-2700; fax (425) 974-2701; website www.zetec.com.
Eddy current and remote field-testing training Levels I, II, IIA, III, qualified data analyst.