2018

Charlotte

Charlotte, North Carolina

On 8 January the Charlotte Section met at Sonaspection for its January meeting. The guest speaker was Jeffery Anderson, the general manager of Sensor Networks, Inc. Anderson provided background on how the company was formed and an overview of what they do. He also discussed the three product lines they have and their applications: ultrasonic sensors, corrosion monitoring sensors, and remote visual products. The Section would like to extend thanks to the meeting sponsor and host, Sonaspection.


Chicago

Chicago, Illinois

The speaker for the joint meeting between the Chicago Section and ASM International Chicago Regional Chapter on 12 February was Frederick E. Schmidt, president of ASM International. Thirty-five members and guests were present at the Crazy Pour restaurant in Villa Park, Illinois, to hear the talk titled “Use of Nondestructive Testing In Failure Analysis.”

Schmidt highlighted that oftentimes, nondestructive testing is used to help to make proper decisions during the investigation and analysis of failures. The test results can assist the forensic investigator as to where destructive test samples should be extracted. The initial investigation may be involved for planning the inspections and selecting the right method, properly performing the inspections, and finally, interpreting and evaluating the results. A case study was presented that showed radiographic and magnetic particle inspection results on heavy castings. This allowed for targeting the areas that were under high stress and facilitated selection of locations where both macrosections and microsamples were made.

Schmidt then demonstrated how the forensic investigator can organize and present the information using ASTM related documents in a manner such that other investigators, litigators, and juries can adequately comprehend the information. He also highlighted the steps necessary to maintain evidence, since many cases can extend several years.

Chicago
At the joint meeting of the Chicago Section and ASM International Chicago Regional Chapter, Frederick Schmidt, president of ASM International (left), presented an ASM scarf to Jennifer Anaya of Alloyweld Inspection Company in recognition of her receiving the Advancement of Women in NDT Recognition from ASNT.


Cleveland

Cleveland, Ohio

Despite stormy weather, 17 members attended the Cleveland Section’s 15 January meeting at the Brew Garden in Middleburg Heights, which provided excellent food, as well as the craft beers enjoyed by many of the attendees. Paul E. Ellis of AlphaTron-X, Ltd. gave an interesting presentation on the history of radiographic imaging systems used in NDT. He also shared many pictures from the Porsche Museum in Stuttgart, Germany. The Section would like to thank Ellis for his excellent talk.


Colorado

Denver, Colorado

On 9 November 2017, the Colorado Section met alongside representatives from American Welding Society for a joint meeting regarding funding a mobile learning lab for a local community college. The meeting took place at Pueblo Community College in Pueblo, Colorado. Approximately 14 were in attendance.

Arthur Malechek was the speaker for the duration of the meeting. Malechek works for the community college in the department of corporate college programs as a technology training coordinator. The discussion centered on a grant the college was working on for funds related to the mobile learning lab. The college is requesting help from local industries and ASNT in regards to the design, layout, and tools needed to get the project from paper to industry.

The meeting also consisted of a short tour of a weld lab at the campus in which a class was in progress. The lab had multiple welding machines and fabrication equipment typically found in a fabrication shop.

Colorado
Arthur Malechek (fifth from left) presented to the Colorado Section during its 9 November meeting.


India

Chennai, India

The India Section successfully conducted its fifth technical meeting on 24 February in Coimbatore. There were nearly 40 members in attendance. The technical talk was titled “Transition from Conventional to Digital Radiography” and was given by P. Manivannan, Samik Bhattacharyya, and Krishna Bhuta. The meeting was sponsored by Topax NDT Solutions LLP and cosponsored by Super Quality Services and the Section.

India
Attendees of the India Section’s fifth technical meeting, held in Coimbatore on 24 February.


Lewis & Clark

Portland, Oregon

On 13 February, 12 members of the Lewis & Clark Section enjoyed a presentation by Matthew Harlan, P.E., with David Evans and Associates, Inc. Harlan discussed bridge inspection methods and inspection protocol for wood, steel, and concrete bridges throughout the region. He discussed David Evans and Associates’ role in the inspection following the recent Amtrak derailment in Washington, as well as the tasks performed by their rope access team in the deepest transit tunnel in the United States. Harlan mentioned that ASNT’s charter of “Creating a Safer World” directly aligns with David Evans and Associates’ mission statement.

Lewis amp Clark
Lewis & Clark Section Co-Chair David Harris presents Matthew Harlan a small token of appreciation for his presentation at the Section’s 13 February meeting.


Miami Valley

Cincinnati, Ohio

The Miami Valley Section met on 7 February at Miami Valley Gaming, with 18 in attendance, for an extremely informative presentation titled “Back to Basics:  Eddy Current” by Brian Bulgrin from American Testing Services, Inc. Bulgrin provided a comprehensive overview of the basics of eddy current and generated a lively discussion around applications of eddy current and comparisons to other techniques.

Miami Valley
Attendees of the Miami Valley Section’s 7 February meeting enjoyed a presentation on eddy current testing by Brian Bulgrin from American Testing Services, Inc.


Mohawk Hudson

Schenectady, New York

The 13 February dinner meeting of the Mohawk Hudson Section was a presentation titled “Additive Manufacturing at GE” by William Carter of GE Global Research in Schenectady, New York. This meeting was also the annually held joint dinner meeting with ASM International and American Welding Society. The powder-bed fusion process got its start in 1986. In 30+ years, it has seen steady growth, resulting in a new manufacturing technology that has evolved from “rapid prototyping” to “functional prototyping,” and now into full-scale production of metal parts. Interest at GE started 10 years ago with investigations into reducing the cost of a fuel injector for an aircraft engine. GE quickly realized that additive manufacturing could free designers from constraints of conventional manufacturing processes, opening paths for novel fuel-saving designs. This talk featured some of the lessons learned in that development and highlighted research in developing the process for higher speed, higher accuracy, and larger part volumes.

Carter joined GE’s Global Research in 1983, and has conducted research programs in numerous manufacturing techniques including casting, coating, forging, and spray forming. He now works in the additive manufacturing laboratory. He has published more than 80 technical articles and a book chapter, and he also holds 41 US patents. The dinner meeting was held at the Edison Club in Rexford, New York, with 29 members and guests at the event.


North Alabama

Huntsville, Alabama

The North Alabama Section held a meeting on 13 February at Yellowhammer Brewery in Hunstville, Alabama. This event was a joint meeting between the North and Central Alabama Sections. The hosts of the meeting were members of the Central Alabama Section, who traveled to Huntsville to provide a technical presentation. Group discussions included the following: hosts for presentations/tech sessions, better ways to reach out to members, and local promotion ideas. There were also introductions of the Central/North Alabama members.

The meeting included a presentation by Veriphase Technical Coordinator Charles A. Hansen and Veriphase Global Product Analyst Nicholas J. Bublitz. The presentation subject was phased array ultrasonic testing and automated detection technology. Trevor Moore, the local Olympus technical sales representative, sponsored the meeting and provided giveaway prizes for the members.


Pittsburgh

Pitsburgh, Pennsylvania

On 16 November 2017, the Pittsburgh Section met at the Springfield Grill in Cranberry Township to hear Jesse Groom of System One speak about microwave inspection. He did a great job filling in for Robert Woodward, who was called away on business. Microwave technology is used to interrogate rubber, fiberglass, HDPE, and other materials that prove difficult to inspect with traditional NDE methods, and can be done with either manual or automated scan imaging techniques.

Pittsburgh
Pittsburgh Section Chair John A. Markanich (left) and Jesse Groom, who presented at the Section’s 16 November meeting.


Rockford Stateline

Rockford, Illinois

The Rockford Stateline Section held a meeting on 9 January that included an eddy current tutorial by Stephen Berg. The Section got a half-hour tutorial explaining how to set up the units with another half hour of hands-on time with two eddy current machines/units, enabling the attendees to put the presentation to practical use. Attendees learned how to set up the equipment and perform a scan on screws, looking for discontinuities on the threads using a coil and drop through technique. With the second unit, they learned how to set up the equipment and perform a horizontal scan technique to look for grinding burns. Again, attendees learned what the indication looked like on the screen.

On 13 February, the Section had Mike Giannini present at the technical meeting. Giannini helped everyone understand the new MPI database system upgrade for wet bench equipment and how it can improve NDT quality control and inspection productivity by downloading a setup that is stored at the machine. This new system can save time in nearly every aspect of the inspection process. The Section would like to thank Giannini for taking the time to educate attendees on what is new in NDT.

Rockford Stateline
Attendees of the Rockford Stateline Section’s 9 January meeting participated in an eddy current tutorial provided by Stephen Berg.


San Diego

San Diego, California

On 6 February, the San Diego Section hosted its fifth technical meeting of the 2017–2018 year. This event was Past Chairs’ Night. The meeting was held at the Best Western Seven Seas with 19 members and guests in attendance.

The speaker for this event was Michael V. McGloin, ASNT regional director for Region 15. McGloin’s talk was titled “Home Inspections.” This talk covered home inspections that homeowners should be doing, and what can happen if such inspections are not done frequently, even if it seems trivial. His presentation covered small water leaks and what the end discovery of damage detailed. It was surprising to see the amount of damage that can be caused by things thought to be minor. This included the amount of inconvenience during repair/renovation, mold discoveries, and what local building code requirements are and the repair costs. Also discussed was what insurance policies cover and do not cover. It was a lively discussion with audience participation.

The evening concluded with recognition of the past chairs in attendance: Juan R. Diaz, Larry G. Olsen, Alan D. Hartwell, Denise L. McKay, Hans J. Weber, John R. Morris, and Aurapong (Jerry) McAnulty. Monthly raffle prizes were sponsored by David Waitt (Fujifilm), Phil Fetto (Chemetall), and the San Diego Section.


Saudi Arabian

Dhahran, Saudi Arabia

The Saudi Arabian Section held a meeting on 15 January. Section Chair Fathi E. Al Qadeeb welcomed everyone and made Section announcements, including information about Level III exams and upcoming short courses. After the announcements, Al Qadeeb introduced the guest speaker from International Robotic Tank Solutions (IRTS), Chief Operating Officer Kamel J. Al Ghoussainy. After the presentation, a question/answer session was held and technical questions were satisfactorily answered by the guest speaker.

On 21 January, members of the Saudi Arabian Section participated in the Science Fun Fair at the International Pakistani Al Khobar School in Al Khobar, Saudi Arabia. Members introduced the practice of nondestructive testing to the students and discussed the role of the Saudi Arabian Section.

Saudi Arabian
Members of the Saudi Arabian Section participated in the Science Fun Fair at the International Pakistani Al Khobar School.


South Texas

San Antonio, Texas

The South Texas Section held its January meeting at the facilities of Sonatest on 31 January. Twelve people were in attendance. The presentation and lab tour were presented by Jeremiah Rawls, who is the regional sales manager. Rawls has been as Sonatest for 17 years, starting in the business as a transducer technician. Sonatest provides NDT ultrasonic solutions and has been an NDT equipment manufacturer for the past 60 years. Everyone enjoyed seeing the inside story on manufacturing ultrasonic transducers.

South Texas
Attendees of the South Texas Section’s January meeting enjoyed a tour of Sonatest.


Section Highlight

During its fifth technical meeting of the 2017–2018 year, the San Diego Section took time to recognize past Section chairs.

San Diego
The San Diego Section’s 6 February meeting included a recognition of past Section chairs. From left: Juan R. Diaz, Hans J. Weber, Denise L. McKay, Aurapong (Jerry) McAnulty, John R. Morris, Alan D. Hartwell, and Larry G. Olsen.